From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> While reviewing a CAN driver internally for MPFS [1], I realised that the modeling of the MSSPLL such that only one of its outputs could be used was not correct. The CAN controllers on MPFS take 2 input clocks - one that is the bus clock, acquired from the main MSSPLL and a second clock for the AHB interface to the result of the SoC. Currently the binding for the CAN controllers and the represetnation of the MSSPLL only allows for one of these clocks. Modify the binding and devicetree to expect two clocks and rework the main clock controller driver for MPFS such that it is capable of providing multiple outputs from the MSSPLL. Cheers, Conor. 1 - Hopefully that'll show up on the lists soon, once we are happy with it ourselves. (As of v2, that's not happened yet, Christmas etc gettin in the way, soonTM). Changes in v2: - Swap MSSPLL out for MSSPLL0 in the driver, there's no functional change there. - drop the unneeded maxItems from clocks. CC: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> CC: Daire McNamara <daire.mcnamara@xxxxxxxxxxxxx> CC: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx> CC: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> CC: "David S. Miller" <davem@xxxxxxxxxxxxx> CC: Eric Dumazet <edumazet@xxxxxxxxxx> CC: Jakub Kicinski <kuba@xxxxxxxxxx> CC: Paolo Abeni <pabeni@xxxxxxxxxx> CC: Rob Herring <robh+dt@xxxxxxxxxx> CC: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx> CC: Paul Walmsley <paul.walmsley@xxxxxxxxxx> CC: Palmer Dabbelt <palmer@xxxxxxxxxxx> CC: Albert Ou <aou@xxxxxxxxxxxxxxxxx> CC: Michael Turquette <mturquette@xxxxxxxxxxxx> CC: Stephen Boyd <sboyd@xxxxxxxxxx> CC: linux-riscv@xxxxxxxxxxxxxxxxxxx CC: linux-can@xxxxxxxxxxxxxxx CC: netdev@xxxxxxxxxxxxxxx CC: devicetree@xxxxxxxxxxxxxxx CC: linux-kernel@xxxxxxxxxxxxxxx CC: linux-clk@xxxxxxxxxxxxxxx Conor Dooley (7): dt-bindings: clock: mpfs: add more MSSPLL output definitions dt-bindings: can: mpfs: add missing required clock clk: microchip: mpfs: split MSSPLL in two clk: microchip: mpfs: setup for using other mss pll outputs clk: microchip: mpfs: add missing MSSPLL outputs clk: microchip: mpfs: convert MSSPLL outputs to clk_divider riscv: dts: microchip: add missing CAN bus clocks .../bindings/net/can/microchip,mpfs-can.yaml | 6 +- arch/riscv/boot/dts/microchip/mpfs.dtsi | 4 +- drivers/clk/microchip/clk-mpfs.c | 154 ++++++++++-------- .../dt-bindings/clock/microchip,mpfs-clock.h | 5 + 4 files changed, 98 insertions(+), 71 deletions(-) -- 2.43.0
