Convert devicetree binding mcp16502-regulator.txt to YAML format.
Signed-off-by: Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
Changes v3 -> v4:
- "additionalProperties: false" placed just after the required list
Changes v2 -> v3:
- keep one line of regulators description
- add additionalProperties: false for regulators
- "description:" at the end for each properties
Changes v1 -> v2:
- reverse subject prefixes
- line break after file "description:"
- drop description for reg
- drop regulator-name
- add regulator-initial-mode
- unevaluatedProperties just after $ref: regulator.yaml#
- additionalProperties just before "required"
- node names generic in example
- drop reg property from i2c
- use 4 spaces for example indentation
---
.../bindings/regulator/mcp16502-regulator.txt | 144 --------------
.../regulator/microchip,mcp16502.yaml | 180 ++++++++++++++++++
2 files changed, 180 insertions(+), 144 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
create mode 100644 Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml
diff --git a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
deleted file mode 100644
index 451cc4e86b01..000000000000
--- a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
+++ /dev/null
@@ -1,144 +0,0 @@
-MCP16502 PMIC
-
-Required properties:
-- compatible: "microchip,mcp16502"
-- reg: I2C slave address
-- lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during
- suspend-to-ram, keeping the PMIC into HIBERNATE mode; this
- property is optional;
-- regulators: A node that houses a sub-node for each regulator within
- the device. Each sub-node is identified using the node's
- name. The content of each sub-node is defined by the
- standard binding for regulators; see regulator.txt.
-
-Regulators of MCP16502 PMIC:
-1) VDD_IO - Buck (1.2 - 3.7 V)
-2) VDD_DDR - Buck (0.6 - 1.85 V)
-3) VDD_CORE - Buck (0.6 - 1.85 V)
-4) VDD_OTHER - BUCK (0.6 - 1.85 V)
-5) LDO1 - LDO (1.2 - 3.7 V)
-6) LDO2 - LDO (1.2 - 3.7 V)
-
-Regulator modes:
-2 - FPWM: higher precision, higher consumption
-4 - AutoPFM: lower precision, lower consumption
-
-Each regulator is defined using the standard binding for regulators.
-
-Example:
-
-mcp16502@5b {
- compatible = "microchip,mcp16502";
- reg = <0x5b>;
- status = "okay";
- lpm-gpios = <&pioBU 7 GPIO_ACTIVE_HIGH>;
-
- regulators {
- VDD_IO {
- regulator-name = "VDD_IO";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3700000>;
- regulator-initial-mode = <2>;
- regulator-allowed-modes = <2>, <4>;
- regulator-always-on;
-
- regulator-state-standby {
- regulator-on-in-suspend;
- regulator-mode = <4>;
- };
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-mode = <4>;
- };
- };
-
- VDD_DDR {
- regulator-name = "VDD_DDR";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1850000>;
- regulator-initial-mode = <2>;
- regulator-allowed-modes = <2>, <4>;
- regulator-always-on;
-
- regulator-state-standby {
- regulator-on-in-suspend;
- regulator-mode = <4>;
- };
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-mode = <4>;
- };
- };
-
- VDD_CORE {
- regulator-name = "VDD_CORE";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1850000>;
- regulator-initial-mode = <2>;
- regulator-allowed-modes = <2>, <4>;
- regulator-always-on;
-
- regulator-state-standby {
- regulator-on-in-suspend;
- regulator-mode = <4>;
- };
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-mode = <4>;
- };
- };
-
- VDD_OTHER {
- regulator-name = "VDD_OTHER";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1850000>;
- regulator-initial-mode = <2>;
- regulator-allowed-modes = <2>, <4>;
- regulator-always-on;
-
- regulator-state-standby {
- regulator-on-in-suspend;
- regulator-mode = <4>;
- };
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-mode = <4>;
- };
- };
-
- LDO1 {
- regulator-name = "LDO1";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3700000>;
- regulator-always-on;
-
- regulator-state-standby {
- regulator-on-in-suspend;
- };
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- LDO2 {
- regulator-name = "LDO2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3700000>;
- regulator-always-on;
-
- regulator-state-standby {
- regulator-on-in-suspend;
- };
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- };
-};
diff --git a/Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml b/Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml
new file mode 100644
index 000000000000..1aca3646789e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/microchip,mcp16502.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MCP16502 - High-Performance PMIC
+
+maintainers:
+ - Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
+
+description:
+ The MCP16502 is an optimally integrated PMIC compatible
+ with Microchip's eMPUs(Embedded Microprocessor Units),
+ requiring Dynamic Voltage Scaling (DVS) with the use
+ of High-Performance mode (HPM).
+
+properties:
+ compatible:
+ const: microchip,mcp16502
+
+ lpm-gpios:
+ maxItems: 1
+ description: GPIO for LPM pin.
+ Note that this GPIO must remain high during
+ suspend-to-ram, keeping the PMIC into HIBERNATE mode.
+
+ reg:
+ maxItems: 1
+
+ regulators:
+ type: object
+ additionalProperties: false
+ description: List of regulators and its properties.
+
+ patternProperties:
+ "^(VDD_(IO|CORE|DDR|OTHER)|LDO[1-2])$":
+ type: object
+ $ref: regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ regulator-initial-mode:
+ enum: [2, 4]
+ default: 2
+ description: Initial operating mode
+
+ regulator-allowed-modes:
+ items:
+ enum: [2, 4]
+ description: Supported modes
+ 2 - FPWM higher precision, higher consumption
+ 4 - AutoPFM lower precision, lower consumption
+
+required:
+ - compatible
+ - reg
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@5b {
+ compatible = "microchip,mcp16502";
+ reg = <0x5b>;
+
+ regulators {
+ VDD_IO {
+ regulator-name = "VDD_IO";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <2>;
+ regulator-allowed-modes = <2>, <4>;
+ regulator-always-on;
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ regulator-mode = <4>;
+ };
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-mode = <4>;
+ };
+ };
+
+ VDD_DDR {
+ regulator-name = "VDD_DDR";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-initial-mode = <2>;
+ regulator-allowed-modes = <2>, <4>;
+ regulator-always-on;
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ regulator-mode = <4>;
+ };
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <4>;
+ };
+ };
+
+ VDD_CORE {
+ regulator-name = "VDD_CORE";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-initial-mode = <2>;
+ regulator-allowed-modes = <2>, <4>;
+ regulator-always-on;
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ regulator-mode = <4>;
+ };
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-mode = <4>;
+ };
+ };
+
+ VDD_OTHER {
+ regulator-name = "VDD_OTHER";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-initial-mode = <2>;
+ regulator-allowed-modes = <2>, <4>;
+ regulator-always-on;
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ regulator-mode = <4>;
+ };
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-mode = <4>;
+ };
+ };
+
+ LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ };
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ LDO2 {
+ regulator-name = "LDO2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ };
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+ };
--
2.34.1
