On Mon, Jan 08, 2024 at 09:48:57AM +0100, Frieder Schrempf wrote: > From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx> > > This patchset contains several improvements and updates for the devicetrees > for the i.MX8MM modules and boards by Kontron Electronics GmbH. > > * Misc cleanups and small fixes > * OSM-S i.MX8MM module refactoring and update to latest HW revision > > Changes in v4: > * Rebase to Shawn's imx/dt64 branch > * Drop patches 1 and 2 (display support) as there are unresolved DTC warnings > and I am not sure how to resolve them at the moment. > > Changes in v3: > * Address Shawn's review comments for patch 1, 2 and 14 (thanks!) > > Changes in v2: > * Rework DSI mux GPIO logic to be compatible with overlay > * Switch from 4 to 2 DSI lanes for LVDS bridge to fix non-working display > > Frieder Schrempf (12): > arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on OSM-S > i.MX8MM > arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on SL/BL > i.MX8MM > arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals > on BL OSM-S board > arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals > on BL board > arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals > on BL OSM-S board > arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals > on BL board > arm64: dts: imx8mm-kontron: Fix interrupt for RTC on OSM-S i.MX8MM > module > arm64: dts: imx8mm-kontron: Fix OSM-S devicetrees to match latest > hardware > arm64: dts: imx8mm-kontron: Disable uneffective PUE bit in SDIO IOMUX > arm64: dts: imx8mm-kontron: Remove useless trickle-diode-disable from > RTC node > arm64: dts: imx8mm-kontron: Add I2C EEPROM on OSM-S Kontron i.MX8MM > arm64: dts: imx8mm-kontron: Refactor devicetree for OSM-S module and > board Applied all, thanks!
