From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
This patchset contains several improvements and updates for the devicetrees
for the i.MX8MM modules and boards by Kontron Electronics GmbH.
* Misc cleanups and small fixes
* OSM-S i.MX8MM module refactoring and update to latest HW revision
Changes in v4:
* Rebase to Shawn's imx/dt64 branch
* Drop patches 1 and 2 (display support) as there are unresolved DTC warnings
and I am not sure how to resolve them at the moment.
Changes in v3:
* Address Shawn's review comments for patch 1, 2 and 14 (thanks!)
Changes in v2:
* Rework DSI mux GPIO logic to be compatible with overlay
* Switch from 4 to 2 DSI lanes for LVDS bridge to fix non-working display
Frieder Schrempf (12):
arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on OSM-S
i.MX8MM
arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on SL/BL
i.MX8MM
arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals
on BL OSM-S board
arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals
on BL board
arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals
on BL OSM-S board
arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals
on BL board
arm64: dts: imx8mm-kontron: Fix interrupt for RTC on OSM-S i.MX8MM
module
arm64: dts: imx8mm-kontron: Fix OSM-S devicetrees to match latest
hardware
arm64: dts: imx8mm-kontron: Disable uneffective PUE bit in SDIO IOMUX
arm64: dts: imx8mm-kontron: Remove useless trickle-diode-disable from
RTC node
arm64: dts: imx8mm-kontron: Add I2C EEPROM on OSM-S Kontron i.MX8MM
arm64: dts: imx8mm-kontron: Refactor devicetree for OSM-S module and
board
.../dts/freescale/imx8mm-kontron-bl-osm-s.dts | 295 +++------
.../boot/dts/freescale/imx8mm-kontron-bl.dts | 38 +-
.../dts/freescale/imx8mm-kontron-osm-s.dtsi | 567 +++++++++++++++++-
.../boot/dts/freescale/imx8mm-kontron-sl.dtsi | 4 +-
4 files changed, 670 insertions(+), 234 deletions(-)
--
2.43.0
