Add dt-schema type bindings for the Mobileye EyeQ5 pin controller. Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx> --- .../bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml | 242 +++++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 243 insertions(+) diff --git a/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml new file mode 100644 index 000000000000..5f00604bf48c --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml @@ -0,0 +1,242 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mobileye,eyeq5-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mobileye EyeQ5 pin controller + +description: > + The EyeQ5 pin controller handles the two pin banks of the system. It belongs + to a system-controller block called OLB. + + Pin control is about bias (pull-down, pull-up), drive strength and muxing. Pin + muxing supports two functions for each pin: first is GPIO, second is + pin-dependent. + + Pins and groups are bijective. + +maintainers: + - Grégory Clement <gregory.clement@xxxxxxxxxxx> + - Théo Lebrun <theo.lebrun@xxxxxxxxxxx> + - Vladimir Kondratiev <vladimir.kondratiev@xxxxxxxxxxxx> + +$ref: pinctrl.yaml# + +properties: + compatible: + enum: + - mobileye,eyeq5-pinctrl + + reg: + maxItems: 1 + +patternProperties: + "-pins?$": + type: object + description: Pin muxing configuration. + $ref: pinmux-node.yaml# + additionalProperties: false + properties: + pins: true + function: + enum: [gpio, + # Bank A + timer0, timer1, timer2, timer5, uart0, uart1, can0, can1, spi0, + spi1, refclk0, + # Bank B + timer3, timer4, timer6, uart2, can2, spi2, spi3, mclk0] + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + required: + - pins + - function + allOf: + - if: + properties: + function: + const: gpio + then: + properties: + pins: + items: # PA0 - PA28, PB0 - PB22 + pattern: '^(P(A|B)1?[0-9]|PA2[0-8]|PB2[0-2])$' + - if: + properties: + function: + const: timer0 + then: + properties: + pins: + items: + enum: [PA0, PA1] + - if: + properties: + function: + const: timer1 + then: + properties: + pins: + items: + enum: [PA2, PA3] + - if: + properties: + function: + const: timer2 + then: + properties: + pins: + items: + enum: [PA4, PA5] + - if: + properties: + function: + const: timer5 + then: + properties: + pins: + items: + enum: [PA6, PA7, PA8, PA9] + - if: + properties: + function: + const: uart0 + then: + properties: + pins: + items: + enum: [PA10, PA11] + - if: + properties: + function: + const: uart1 + then: + properties: + pins: + items: + enum: [PA12, PA13] + - if: + properties: + function: + const: can0 + then: + properties: + pins: + items: + enum: [PA14, PA15] + - if: + properties: + function: + const: can1 + then: + properties: + pins: + items: + enum: [PA16, PA17] + - if: + properties: + function: + const: spi0 + then: + properties: + pins: + items: + enum: [PA18, PA19, PA20, PA21, PA22] + - if: + properties: + function: + const: spi1 + then: + properties: + pins: + items: + enum: [PA23, PA24, PA25, PA26, PA27] + - if: + properties: + function: + const: refclk0 + then: + properties: + pins: + items: + enum: [PA28] + - if: + properties: + function: + const: timer3 + then: + properties: + pins: + items: + enum: [PB0, PB1] + - if: + properties: + function: + const: timer4 + then: + properties: + pins: + items: + enum: [PB2, PB3] + - if: + properties: + function: + const: timer6 + then: + properties: + pins: + items: + enum: [PB4, PB5, PB6, PB7] + - if: + properties: + function: + const: uart2 + then: + properties: + pins: + items: + enum: [PB8, PB9] + - if: + properties: + function: + const: can2 + then: + properties: + pins: + items: + enum: [PB10, PB11] + - if: + properties: + function: + const: spi2 + then: + properties: + pins: + items: + enum: [PB12, PB13, PB14, PB15, PB16] + - if: + properties: + function: + const: spi3 + then: + properties: + pins: + items: + enum: [PB17, PB18, PB19, PB20, PB21] + - if: + properties: + function: + const: mclk0 + then: + properties: + pins: + items: + enum: [PB22] + +required: + - compatible + - reg + +additionalProperties: false diff --git a/MAINTAINERS b/MAINTAINERS index e81c4db22df3..15c9987af637 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14788,6 +14788,7 @@ L: linux-mips@xxxxxxxxxxxxxxx S: Maintained F: Documentation/devicetree/bindings/clock/mobileye,eyeq5-clk.yaml F: Documentation/devicetree/bindings/mips/mobileye.yaml +F: Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml F: Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml F: arch/mips/boot/dts/mobileye/ F: arch/mips/configs/eyeq5_defconfig -- 2.43.0
