voltage-divider is always an iio consumer at the same time it is optionally an iio provider. Hence add #io-channel-cells Also update example. Signed-off-by: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx> --- .../bindings/iio/afe/voltage-divider.yaml | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml index dddf97b50549..98fec8548cc3 100644 --- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml +++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml @@ -39,6 +39,13 @@ properties: description: | Channel node of a voltage io-channel. + '#io-channel-cells': + description: + In addition to consuming the measurement services of a voltage output + channel the voltage divider can act as a provider of measurement + services to other devices. + const: 1 + output-ohms: description: Resistance Rout over which the output voltage is measured. See full-ohms. @@ -75,12 +82,17 @@ examples: spi-max-frequency = <1000000>; }; }; - sysv { + p12v_vd: sysv { compatible = "voltage-divider"; io-channels = <&maxadc 1>; + #io-channel-cells = <1>; /* Scale the system voltage by 22/222 to fit the ADC range. */ output-ohms = <22>; full-ohms = <222>; /* 200 + 22 */ }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&p12v_vd 0>; + }; ... base-commit: 861c0981648f5b64c86fd028ee622096eb7af05a -- 2.42.0