Re: [PATCH v3 2/2] arm64: dts: qcom: ipq6018: enable sdhci node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Bjorn
> Subject and commit message says "enable", but this says disable. Could
> you change this to "Add" instead?

Thanks for your suggestion, I will change this to "Add".

> Do you have a patch for any board where this is actually enabled?
> Perhaps you missed a 3rd patch that enables this and uses the ipq6018_l2
> regulator you add in patch 1?

Some ipq6000 devices do not have pmic chips, resulting in l2 being
unavailable. So vqmmc-supply should be configured in the dts of each
specific device. As Robert suggested, the ipq6018_l2 node is used for
the device dts reference.

Thanks,
Chukun

-- 
2.25.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux