On Thu, Jan 25, 2024 at 05:08:04PM +0000, Conor Dooley wrote: > On Thu, Jan 25, 2024 at 11:14:56AM +0100, Francesco Dolcini wrote: > > From: Joao Paulo Goncalves <joao.goncalves@xxxxxxxxxxx> > > > > Add the toradex,apalis-imx8-eval-v1.2 and > > toradex,apalis-imx8-v1.1-eval-v1.2 compatible strings for version 1.2 > > of the Apalis Evaluation Board. > > > > Version v1.2 includes the following changes compared to v1.1: > > > > - 8-bit MMC connector replaced with a 4-bit uSD connector. > > - Audio codec NAU88C22 added. > > - M24C02 EEPROM i2c added. > > - MIPI-CSI-2 connector directly to the board added. > > - PCIe switch PEX8605 removed and PCIe now is routed directly to Mini > > PCIe connector. > > - Power measurement IC INA219 added. > > - Replaced DVI with HDMI connector. > > - Single-channel USB to UART converter replaced with four-channel USB > > to UART/JTAG. > > - Temperature sensor TMP75 added. > > > > Please note that board version v1.0 (which reached EOL) is compatible with > > v1.1, therefore toradex,apalis-imx8-eval and toradex,apalis-v1.1-imx8-eval > > compatible strings should be used for both v1.0 and v1.1. > > > > Signed-off-by: Joao Paulo Goncalves <joao.goncalves@xxxxxxxxxxx> > > Signed-off-by: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx> > > I was convinced that I acked this already a few days ago, but no: > https://lore.kernel.org/all/20240124141849.26254-2-hiagofranco@xxxxxxxxx/ Same, but different ;-). This is a modular system made of a SoM + carrier board. Those two series introduce a new revision of the same carrier board [1], combined with two different SoMs (apalis imx8 [2] and apalis imx6 [3]). Francesco [1] https://www.toradex.com/products/carrier-board/apalis-evaluation-board [2] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8 [3] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-freescale-imx-6
