From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx> This series introduces support for the new Apalis Evaluation Board v1.2 for imx8qm-based Toradex SoM. With the introduction of board v1.2, a common board configurations dtsi file and two version-specific dtsi board files were added. Consequently, four possible dts files are generated to support the range of different SoM versions. Additionally, updates have been made to dts freescale/Makefile and arm/fsl.yaml to accommodate the changes. Joao Paulo Goncalves (2): dt-bindings: arm: fsl: add imx8qm apalis eval v1.2 carrier board arm64: dts: freescale: imx8qm: add apalis eval v1.2 carrier board .../devicetree/bindings/arm/fsl.yaml | 6 +- arch/arm64/boot/dts/freescale/Makefile | 2 + .../dts/freescale/imx8-apalis-eval-v1.1.dtsi | 26 ++++ .../dts/freescale/imx8-apalis-eval-v1.2.dtsi | 124 ++++++++++++++++++ .../boot/dts/freescale/imx8-apalis-eval.dtsi | 22 ---- .../dts/freescale/imx8qm-apalis-eval-v1.2.dts | 16 +++ .../boot/dts/freescale/imx8qm-apalis-eval.dts | 2 +- .../imx8qm-apalis-v1.1-eval-v1.2.dts | 26 ++++ .../dts/freescale/imx8qm-apalis-v1.1-eval.dts | 2 +- 9 files changed, 200 insertions(+), 26 deletions(-) create mode 100644 arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.1.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.2.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-eval-v1.2.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval-v1.2.dts -- 2.39.2
