On 24/01/2024 08:36, Manivannan Sadhasivam wrote:
PCIe PHY hw doesn't require PCIE_AUX_CLK for functioning. This clock is
only required by the PCIe controller. Hence drop it from pcie_phy node.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8550.dtsi | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index ee1ba5a8c8fc..f074683f7940 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -1760,13 +1760,11 @@ pcie0_phy: phy@1c06000 {
compatible = "qcom,sm8550-qmp-gen3x2-pcie-phy";
reg = <0 0x01c06000 0 0x2000>;
- clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
- <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&tcsr TCSR_PCIE_0_CLKREF_EN>,
<&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
<&gcc GCC_PCIE_0_PIPE_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "rchng",
- "pipe";
+ clock-names = "cfg_ahb", "ref", "rchng", "pipe";
resets = <&gcc GCC_PCIE_0_PHY_BCR>;
reset-names = "phy";
Tested-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> # on SM8550-HDK
