Due to the different PMIC configuration found in the SA8295P platform, compared to SC8280XP, the VDD_GFX pads are supplied by an dedicated MAX20411 LDO. Support for expressing the regulator supply is added to the binding, the support for enabling the parent supply for GX is added, the missing gfx.lvl power-domain is dropped, and the DeviceTree is wired up to enable the GPU in this configuration. Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx> --- Changes in v3: - Removed one unnecessary empty line in DT node - Rebased series to v6.8-rc1 - Link to v2: https://lore.kernel.org/r/20231220-sa8295p-gpu-v2-0-4763246b72c0@xxxxxxxxxxx Changes in v2: - Made gpucc binding accept either power-domain or vdd-gfx-supply - Updated comment in gdsc_gx_do_nothing_enable() - Added a comment for the /delete-property/ power-domains - Fixed node and property sort order in dts - Switched zap firmware to use mbn file - Link to v1: https://lore.kernel.org/r/20231220-sa8295p-gpu-v1-0-d8cdf2257f97@xxxxxxxxxxx --- Bjorn Andersson (8): dt-bindings: clock: qcom: Allow VDD_GFX supply to GX clk: qcom: gdsc: Enable supply reglator in GPU GX handler clk: qcom: gpucc-sc8280xp: Add external supply for GX gdsc soc: qcom: rpmhpd: Drop SA8540P gfx.lvl arm64: dts: qcom: sa8540p: Drop gfx.lvl as power-domain for gpucc arm64: dts: qcom: sa8295p-adp: add max20411 arm64: dts: qcom: sa8295p-adp: Enable GPU arm64: defconfig: Enable MAX20411 regulator driver .../devicetree/bindings/clock/qcom,gpucc.yaml | 16 +++++ arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 68 ++++++++++++++++++++++ arch/arm64/boot/dts/qcom/sa8540p.dtsi | 3 + arch/arm64/configs/defconfig | 1 + drivers/clk/qcom/gdsc.c | 12 +++- drivers/clk/qcom/gpucc-sc8280xp.c | 1 + drivers/pmdomain/qcom/rpmhpd.c | 1 - 7 files changed, 99 insertions(+), 3 deletions(-) --- base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d change-id: 20231220-sa8295p-gpu-51c5f343e3ec Best regards, -- Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>