From: Rafał Miłecki <rafal@xxxxxxxxxx> This helps validating DTS files. Introduced changes: 1. Reworded title 2. Dropper redundant properties descriptions 3. Added required #include and adjusted "reg" in example Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx> --- .../bindings/rtc/mediatek,mt2712-rtc.yaml | 39 +++++++++++++++++++ .../devicetree/bindings/rtc/rtc-mt2712.txt | 14 ------- 2 files changed, 39 insertions(+), 14 deletions(-) create mode 100644 Documentation/devicetree/bindings/rtc/mediatek,mt2712-rtc.yaml delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt2712.txt diff --git a/Documentation/devicetree/bindings/rtc/mediatek,mt2712-rtc.yaml b/Documentation/devicetree/bindings/rtc/mediatek,mt2712-rtc.yaml new file mode 100644 index 000000000000..75624ddf6d4d --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/mediatek,mt2712-rtc.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/mediatek,mt2712-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT2712 on-SoC RTC + +allOf: + - $ref: rtc.yaml# + +maintainers: + - Ran Bi <ran.bi@xxxxxxxxxxxx> + +properties: + compatible: + const: mediatek,mt2712-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + rtc@10011000 { + compatible = "mediatek,mt2712-rtc"; + reg = <0x10011000 0x1000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt b/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt deleted file mode 100644 index c33d87e5e753..000000000000 --- a/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt +++ /dev/null @@ -1,14 +0,0 @@ -Device-Tree bindings for MediaTek SoC based RTC - -Required properties: -- compatible : Should be "mediatek,mt2712-rtc" : for MT2712 SoC -- reg : Specifies base physical address and size of the registers; -- interrupts : Should contain the interrupt for RTC alarm; - -Example: - -rtc: rtc@10011000 { - compatible = "mediatek,mt2712-rtc"; - reg = <0 0x10011000 0 0x1000>; - interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>; -}; -- 2.35.3