Add SPI port configuration for Exynos850 SoC. It has 3 USI blocks which
can be configured in SPI mode:
* spi_0: BLK_PERI_SPI_0 (0x13940000)
* spi_1: BLK_ALIVE_USI_CMGP00 (0x11d00000)
* spi_2: BLK_ALIVE_USI_CMGP01 (0x11d20000)
SPI FIFO depth is 64 bytes for all those SPI blocks, so the
.fifo_lvl_mask value is set to 0x7f. All blocks have DIV_4 as the
default internal clock divider, and an internal loopback mode to run
a loopback test.
Signed-off-by: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
---
drivers/spi/spi-s3c64xx.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 0e48ffd499b9..f7d623ad6ac3 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -1461,6 +1461,17 @@ static const struct s3c64xx_spi_port_config exynos5433_spi_port_config = {
.quirks = S3C64XX_SPI_QUIRK_CS_AUTO,
};
+static const struct s3c64xx_spi_port_config exynos850_spi_port_config = {
+ .fifo_lvl_mask = { 0x7f, 0x7f, 0x7f },
+ .rx_lvl_offset = 15,
+ .tx_st_done = 25,
+ .clk_div = 4,
+ .high_speed = true,
+ .clk_from_cmu = true,
+ .has_loopback = true,
+ .quirks = S3C64XX_SPI_QUIRK_CS_AUTO,
+};
+
static const struct s3c64xx_spi_port_config exynosautov9_spi_port_config = {
.fifo_lvl_mask = { 0x1ff, 0x1ff, 0x7f, 0x7f, 0x7f, 0x7f, 0x1ff, 0x7f,
0x7f, 0x7f, 0x7f, 0x7f},
@@ -1515,6 +1526,9 @@ static const struct of_device_id s3c64xx_spi_dt_match[] = {
{ .compatible = "samsung,exynos5433-spi",
.data = (void *)&exynos5433_spi_port_config,
},
+ { .compatible = "samsung,exynos850-spi",
+ .data = (void *)&exynos850_spi_port_config,
+ },
{ .compatible = "samsung,exynosautov9-spi",
.data = (void *)&exynosautov9_spi_port_config,
},
--
2.39.2
