Re: [PATCH 5/6] regulator: max77843: Add max77843 regulator driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Krzysztof,

2015년 01월 23일 16:18에 Krzysztof Kozłowski 이(가) 쓴 글:
2015-01-23 6:02 GMT+01:00 Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>:
This patch adds new regulator driver to support max77843
MFD(Multi Function Device) chip`s regulators.
The Max77843 has two voltage regulators for USB safeout.

Cc: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Beomho Seo <beomho.seo@xxxxxxxxxxx>
Signed-off-by: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
---
  drivers/regulator/Kconfig    |    8 ++
  drivers/regulator/Makefile   |    1 +
  drivers/regulator/max77843.c |  259 ++++++++++++++++++++++++++++++++++++++++++
  3 files changed, 268 insertions(+)
  create mode 100644 drivers/regulator/max77843.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index c3a60b5..c1f9c33 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -414,6 +414,14 @@ config REGULATOR_MAX77802
           Exynos5420/Exynos5800 SoCs to control various voltages.
           It includes support for control of voltage and ramp speed.

+config REGULATOR_MAX77843
+       tristate "Maxim 77843 regulator"
+       depends on MFD_MAX77843
+       help
+         This driver controls a Maxim 77843 regulator.
+         The regulator include two 'SAFEOUT' for USB(Universal Serial Bus)
+         This is suitable for Exynos5433 SoC chips.
+
  config REGULATOR_MC13XXX_CORE
         tristate

diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 1f28ebf..12408d6 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
  obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o
  obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
  obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o
+obj-$(CONFIG_REGULATOR_MAX77843) += max77843.o
  obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
  obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
  obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
diff --git a/drivers/regulator/max77843.c b/drivers/regulator/max77843.c
new file mode 100644
index 0000000..86afc7a
--- /dev/null
+++ b/drivers/regulator/max77843.c
@@ -0,0 +1,259 @@
+/*
+ * max77843.c - Regulator driver for the Maxim MAX77843
+ *
+ * Copyright (C) 2014 Samsung Electrnoics
+ * Author: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/max77843-private.h>
+#include <linux/regulator/of_regulator.h>
+
+#define MAX77843_SUPPORTED_VOLTAGE_NUM 4
+
+enum max77843_regulator_type {
+       MAX77843_SAFEOUT1 = 0,
+       MAX77843_SAFEOUT2,
+       MAX77843_CHARGER,
+
+       MAX77843_NUM,
+};
+
+static const unsigned int max77843_regulator_table[] = {
+       4850000,
+       4900000,
+       4950000,
+       3300000,
+};
+
+static int max77843_reg_is_enabled(struct regulator_dev *rdev)
+{
+       struct regmap *regmap = rdev->regmap;
+       int ret;
+       unsigned int reg;
+
+       ret = regmap_read(regmap, rdev->desc->enable_reg, &reg);
+       if (ret) {
+               dev_err(&rdev->dev, "Fialed to read charger register\n");
+               return ret;
+       }
+
+       return (reg & rdev->desc->enable_mask) == rdev->desc->enable_mask;
+}
+
+static int max77843_reg_get_current_limit(struct regulator_dev *rdev)
+{
+       struct regmap *regmap = rdev->regmap;
+       unsigned int chg_min_uA = rdev->constraints->min_uA;
+       unsigned int chg_max_uA = rdev->constraints->max_uA;
+       unsigned int val;
+       int ret;
+       unsigned int reg, sel;
+
+       ret = regmap_read(regmap, MAX77843_CHG_REG_CHG_CNFG_02, &reg);
+       if (ret) {
+               dev_err(&rdev->dev, "Failed to read charger register\n");
+               return ret;
+       }
+
+       sel = reg & MAX77843_CHG_FAST_CHG_CURRENT_MASK;
+
+       if (sel < 0x03)
+               sel = 0;
+       else
+               sel -= 2;
+
+       val = chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel;
+       if (val > chg_max_uA)
+               return -EINVAL;
+
+       return val;
+}
+
+static int max77843_reg_set_current_limit(struct regulator_dev *rdev,
+               int min_uA, int max_uA)
+{
+       struct regmap *regmap = rdev->regmap;
+       unsigned int chg_min_uA = rdev->constraints->min_uA;
+       int sel = 0;
+
+       while (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel < min_uA)
+               sel++;
+
+       if (chg_min_uA + MAX77843_CHG_FAST_CHG_CURRENT_STEP * sel > max_uA)
+               return -EINVAL;
+
+       sel += 2;
+
+       return regmap_write(regmap, MAX77843_CHG_REG_CHG_CNFG_02, sel);
+}
+
+static struct regulator_ops max77843_charger_ops = {
+       .is_enabled             = max77843_reg_is_enabled,
+       .enable                 = regulator_enable_regmap,
+       .disable                = regulator_disable_regmap,
+       .get_current_limit      = max77843_reg_get_current_limit,
+       .set_current_limit      = max77843_reg_set_current_limit,
+};
+
+static struct regulator_ops max77843_regulator_ops = {
+       .is_enabled             = regulator_is_enabled_regmap,
+       .enable                 = regulator_enable_regmap,
+       .disable                = regulator_disable_regmap,
+       .list_voltage           = regulator_list_voltage_table,
+       .get_voltage_sel        = regulator_get_voltage_sel_regmap,
+       .set_voltage_sel        = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_desc max77843_supported_regulators[] = {
+       [MAX77843_SAFEOUT1] = {
+               .name           = "SAFEOUT1",
+               .id             = MAX77843_SAFEOUT1,
+               .ops            = &max77843_regulator_ops,
+               .type           = REGULATOR_VOLTAGE,
+               .owner          = THIS_MODULE,
+               .n_voltages     = MAX77843_SUPPORTED_VOLTAGE_NUM,
+               .volt_table     = max77843_regulator_table,
+               .enable_reg     = MAX77843_SYS_REG_SAFEOUTCTRL,
+               .enable_mask    = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT1,
+               .vsel_reg       = MAX77843_SYS_REG_SAFEOUTCTRL,
+               .vsel_mask      = MAX77843_REG_SAFEOUTCTRL_SAFEOUT1_MASK,
+       },
+       [MAX77843_SAFEOUT2] = {
+               .name           = "SAFEOUT2",
+               .id             = MAX77843_SAFEOUT2,
+               .ops            = &max77843_regulator_ops,
+               .type           = REGULATOR_VOLTAGE,
+               .owner          = THIS_MODULE,
+               .n_voltages     = MAX77843_SUPPORTED_VOLTAGE_NUM,
+               .volt_table     = max77843_regulator_table,
+               .enable_reg     = MAX77843_SYS_REG_SAFEOUTCTRL,
+               .enable_mask    = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT2,
+               .vsel_reg       = MAX77843_SYS_REG_SAFEOUTCTRL,
+               .vsel_mask      = MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK,
+       },
+       [MAX77843_CHARGER] = {
+               .name           = "CHARGER",
+               .id             = MAX77843_CHARGER,
+               .ops            = &max77843_charger_ops,
+               .type           = REGULATOR_CURRENT,
+               .owner          = THIS_MODULE,
+               .enable_reg     = MAX77843_CHG_REG_CHG_CNFG_00,
+               .enable_mask    = MAX77843_CHG_MASK,
+       },
+};
+
+static struct of_regulator_match max77843_regulator_matches[] = {
+       { .name = "SAFEOUT1", },
+       { .name = "SAFEOUT2", },
+       { .name = "CHARGER", },
+};
+
+static struct regmap *max77843_get_regmap(struct max77843 *max77843, int reg_id)
+{
+       switch (reg_id) {
+       case MAX77843_SAFEOUT1:
+       case MAX77843_SAFEOUT2:
+               return max77843->regmap;
+       case MAX77843_CHARGER:
+               return max77843->regmap_chg;
+       default:
+               return max77843->regmap;
+       }
+}
+
+static int max77843_regulator_dt_parse(struct platform_device *pdev)
+{
+       struct device_node *np;
+       int ret;
+
+       np = of_get_child_by_name(pdev->dev.parent->of_node, "regulators");
+       if (!np) {
+               dev_err(&pdev->dev,
+                       "Cannot get child OF node for regulators\n");
+               return -EINVAL;
+       }
+
+       ret = of_regulator_match(&pdev->dev, np, max77843_regulator_matches,
+                       ARRAY_SIZE(max77843_regulator_matches));
+       if (ret < 0) {
+               dev_err(&pdev->dev, "Cannot parsing regulator init data\n");
+               return ret;
+       }
+
+       of_node_put(np);
+
+       return 0;
Use simplified DT parsing method (of_match and regulators_node from
regulators_desc). This function could be removed then.

Thanks to advice.
I will use more simplified method in next version.

Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


Thanks,
Jaewon Kim
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux