Re: [PATCH 1/6] mfd: max77843: Add max77843 MFD driver core driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Krzysztof,

2015년 01월 23일 15:32에 Krzysztof Kozlowski 이(가) 쓴 글:
2015-01-23 6:02 GMT+01:00 Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>:
This patch adds MAX77843 core/irq driver to support PMIC,
MUIC(Micro USB Interface Controller), Charger, Fuel Gauge,
LED and Haptic device.

Cc: Lee Jones <lee.jones@xxxxxxxxxx>
Signed-off-by: Beomho Seo <beomho.seo@xxxxxxxxxxx>
Signed-off-by: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
---
  drivers/mfd/Kconfig                  |   14 ++
  drivers/mfd/Makefile                 |    1 +
  drivers/mfd/max77843.c               |  241 ++++++++++++++++++++
  include/linux/mfd/max77843-private.h |  410 ++++++++++++++++++++++++++++++++++
  4 files changed, 666 insertions(+)
  create mode 100644 drivers/mfd/max77843.c
  create mode 100644 include/linux/mfd/max77843-private.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2e6b731..0c67c79 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -442,6 +442,20 @@ config MFD_MAX77693
           additional drivers must be enabled in order to use the functionality
           of the device.

+config MFD_MAX77843
+       bool "Maxim Semiconductor MAX77843 PMIC Support"
+       depends on I2C=y
+       select MFD_CORE
+       select REGMAP_I2C
+       select REGMAP_IRQ
+       help
+         Say yes here to add support for Maxim Semiconductor MAX77843.
+         This is companion Power Management IC with LEDs, Haptic, Charger,
+         Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip.
+         This driver provides common support for accessing the device;
+         additional drivers must be enabled in order to use the functionality
+         of the device.
+
  config MFD_MAX8907
         tristate "Maxim Semiconductor MAX8907 PMIC Support"
         select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 53467e2..fe4f75c 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -117,6 +117,7 @@ obj-$(CONFIG_MFD_DA9063)    += da9063.o
  obj-$(CONFIG_MFD_MAX14577)     += max14577.o
  obj-$(CONFIG_MFD_MAX77686)     += max77686.o
  obj-$(CONFIG_MFD_MAX77693)     += max77693.o
+obj-$(CONFIG_MFD_MAX77843)     += max77843.o
  obj-$(CONFIG_MFD_MAX8907)      += max8907.o
  max8925-objs                   := max8925-core.o max8925-i2c.o
  obj-$(CONFIG_MFD_MAX8925)      += max8925.o
diff --git a/drivers/mfd/max77843.c b/drivers/mfd/max77843.c
new file mode 100644
index 0000000..d7f8b76
--- /dev/null
+++ b/drivers/mfd/max77843.c
@@ -0,0 +1,241 @@
+/*
+ * max77843.c - MFD core driver for the Maxim MAX77843
+ *
+ * Copyright (C) 2014 Samsung Electrnoics
+ * Author: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max77843-private.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+static const struct mfd_cell max77843_devs[] = {
+       {
+               .name = "max77843-muic",
+               .of_compatible = "maxim,max77843-muic",
+       }, {
+               .name = "max77843-regulator",
+               .of_compatible = "maxim,max77843-regulator",
+       }, {
+               .name = "max77843-charger",
+               .of_compatible = "maxim,max77843-charger"
+       }, {
+               .name = "max77843-fuelgauge",
+               .of_compatible = "maxim,max77843-fuelgauge",
+       },
+};
+
+static const struct regmap_config max77843_charger_regmap_config = {
+       .reg_bits       = 8,
+       .val_bits       = 8,
+       .max_register   = MAX77843_CHG_REG_END,
+};
+
+static const struct regmap_config max77843_regmap_config = {
+       .reg_bits       = 8,
+       .val_bits       = 8,
+       .max_register   = MAX77843_SYS_REG_END,
+};
+
+static const struct regmap_irq max77843_irqs[] = {
+       /* TOPSYS interrupts */
+       { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSUVLO_INT, },
+       { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSOVLO_INT, },
+       { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TSHDN_INT, },
+       { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TM_INT, },
+};
+
+static const struct regmap_irq_chip max77843_irq_chip = {
+       .name           = "max77843",
+       .status_base    = MAX77843_SYS_REG_SYSINTSRC,
+       .mask_base      = MAX77843_SYS_REG_SYSINTMASK,
+       .mask_invert    = false,
+       .num_regs       = 1,
+       .irqs           = max77843_irqs,
+       .num_irqs       = ARRAY_SIZE(max77843_irqs),
+};
+
+static int max77843_chg_init(struct max77843 *max77843)
+{
Could this function be moved to the charger driver? This way the
driver will manage its own resources instead of depending on parent
MFD driver.

+       int ret;
+
+       max77843->i2c_chg = i2c_new_dummy(max77843->i2c->adapter, I2C_ADDR_CHG);
+       if (!max77843->i2c_chg) {
+               dev_err(&max77843->i2c->dev,
+                               "Cannot allocate I2C device for Charger\n");
+               return PTR_ERR(max77843->i2c_chg);
+       }
+       i2c_set_clientdata(max77843->i2c_chg, max77843);
+
+       max77843->regmap_chg = devm_regmap_init_i2c(max77843->i2c_chg,
+                       &max77843_charger_regmap_config);
+       if (IS_ERR(max77843->regmap_chg)) {
+               ret = PTR_ERR(max77843->regmap_chg);
+               goto err_chg_i2c;
+       }
+
+       return 0;
+
+err_chg_i2c:
+       i2c_unregister_device(max77843->i2c_chg);
+
+       return ret;
+}
+
+static int max77843_probe(struct i2c_client *i2c,
+                                       const struct i2c_device_id *id)
+{
+       struct max77843 *max77843;
+       int ret;
+       unsigned int reg_data;
+
+       max77843 = devm_kzalloc(&i2c->dev, sizeof(*max77843), GFP_KERNEL);
+       if (!max77843)
+               return -ENOMEM;
+
+       i2c_set_clientdata(i2c, max77843);
+       max77843->dev = &i2c->dev;
+       max77843->i2c = i2c;
+       max77843->irq = i2c->irq;
+
+       max77843->regmap = devm_regmap_init_i2c(i2c,
+                       &max77843_regmap_config);
+       if (IS_ERR(max77843->regmap)) {
+               dev_err(&i2c->dev, "Failed to allocate topsys register map\n");
+               return PTR_ERR(max77843->regmap);
+       }
+
+       ret = regmap_add_irq_chip(max77843->regmap, max77843->irq,
+                       IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
+                       0, &max77843_irq_chip, &max77843->irq_data);
Why shared IRQ?

This IRQ shared with submodules.
you can see another IRQ register process in extcon-max77843 driver.


+       if (ret) {
+               dev_err(&i2c->dev, "Failed to add TOPSYS IRQ chip\n");
+               return ret;
+       }
+
+       ret = regmap_read(max77843->regmap,
+                       MAX77843_SYS_REG_PMICID, &reg_data);
+       if (ret < 0) {
+               dev_err(&i2c->dev, "Failed to read PMIC ID\n");
+               goto err_pmic_id;
+       }
+       dev_info(&i2c->dev, "device ID: 0x%x\n", reg_data);
+
+       ret = max77843_chg_init(max77843);
+       if (ret) {
+               dev_err(&i2c->dev, "Failed to init Charger\n");
+               goto err_pmic_id;
+       }
+
+       ret = regmap_update_bits(max77843->regmap,
+                       MAX77843_SYS_REG_INTSRCMASK,
+                       MAX77843_INTSRC_MASK_MASK,
+                       (unsigned int)~MAX77843_INTSRC_MASK_MASK);
+       if (ret < 0) {
+               dev_err(&i2c->dev, "Failed to unmask interrupt sourece\n");
s/sourece/source/

I will fix typo in next version.


Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


Thanks to review my patch.
Jaewon Kim
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux