On Fri, 19 Jan 2024 10:41:04 +0100, AngeloGioacchino Del Regno wrote: > This IP has only one interrupt, hence interrupt-names is not necessary > to have. > Since there is no user yet, simply remove interrupt-names. > > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> > --- > .../devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml | 5 ----- > 1 file changed, 5 deletions(-) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.example.dtb: mt6360@34: tcpc: 'interrupt-names' is a required property from schema $id: http://devicetree.org/schemas/mfd/mediatek,mt6360.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.example.dtb: tcpc: 'interrupt-names' is a required property from schema $id: http://devicetree.org/schemas/usb/mediatek,mt6360-tcpc.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/mediatek,mt6360.example.dtb: pmic@34: tcpc: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/mfd/mediatek,mt6360.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/mediatek,mt6360.example.dtb: tcpc: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/usb/mediatek,mt6360-tcpc.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240119094105.98312-1-angelogioacchino.delregno@xxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.