ADRF5740 and HMC540S have a 4 bit parallel interface. Update ctr-gpios description and min/maxItems values depending on the matched compatible to correctly reflect the hardware properties. Fixes: 79f2ff6461e7 ("dt-bindings: iio: hmc425a: add entry for ADRF5740 Attenuator") Fixes: 20f87a9a26be ("dt-bindings: iio: hmc425a: add entry for HMC540S") Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> Signed-off-by: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx> --- .../bindings/iio/amplifiers/adi,hmc425a.yaml | 33 +++++++++++++++++-- 1 file changed, 30 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml index 67de9d4e3a1d..a434cb8ddcc9 100644 --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml @@ -33,11 +33,38 @@ properties: ctrl-gpios: description: - Must contain an array of 6 GPIO specifiers, referring to the GPIO pins - connected to the control pins V1-V6. - minItems: 6 + Must contain an array of GPIO specifiers, referring to the GPIO pins + connected to the control pins. + ADRF5740 - 4 GPIO connected to D2-D5 + HMC540S - 4 GPIO connected to V1-V4 + HMC425A - 6 GPIO connected to V1-V6 + minItems: 1 maxItems: 6 +allOf: + - if: + properties: + compatible: + contains: + const: adi,hmc425a + then: + properties: + ctrl-gpios: + minItems: 6 + maxItems: 6 + - if: + properties: + compatible: + contains: + anyOf: + - const: adi,adrf5740 + - const: adi,hmc540s + then: + properties: + ctrl-gpios: + minItems: 4 + maxItems: 4 + required: - compatible - ctrl-gpios -- 2.42.0