On 1/10/2024 7:56 PM, Krzysztof Kozlowski wrote:
On 10/01/2024 12:20, Luo Jie wrote:
Add the MDIO device tree of ipq5332.
Subject: drop "device tree", it is obvious. Commit msg: say something
more instead of copying the subject. Or better squash the entire patch.
Will update the commit message to improve the description when the
series is updated.
Signed-off-by: Luo Jie <quic_luoj@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/ipq5332.dtsi | 44 +++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index bc89480820cb..e6c780e69d6e 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -214,6 +214,38 @@ serial_0_pins: serial0-state {
drive-strength = <8>;
bias-pull-up;
};
+
+ mdio0_pins: mdio0-state {
+ mux_0 {
This wasn't tested...
It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).
Best regards,
Krzysztof
We will follow up the guidance mentioned in the link to validate the DTS
patches.