Dear Lorenzo and Sudeep, On Wed, 21 Jan 2015 20:33:14 -0800 Jisheng Zhang <jszhang@xxxxxxxxxxx> wrote: > Dear Lorenzo, > > On Wed, 21 Jan 2015 05:56:11 -0800 > Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx> wrote: > > > On Wed, Jan 21, 2015 at 01:35:07PM +0000, Jisheng Zhang wrote: > > > Dear Sudeep, > > > > > > On Wed, 21 Jan 2015 05:21:39 -0800 > > > Jisheng Zhang <jszhang@xxxxxxxxxxx> wrote: > > > > > > > Dear Sudeep, > > > > > > > > On Wed, 21 Jan 2015 03:35:54 -0800 > > > > Sudeep Holla <sudeep.holla@xxxxxxx> wrote: > > > > > > > > > ARM based platforms implement unique ways to enter system suspend > > > > > (i.e. Suspend to RAM). The mechanism and the parameters defining the > > > > > system state vary on a per-platform basis forcing the OS to handle > > > > > it in very platform specific way. > > > > > > > > > > Since ARM 32-bit systems had machine specific code, no attempts to > > > > > standardize are being made as it provides easy way to implement > > > > > suspend operations in a platform specific manner. However, this > > > > > approach not only makes maintainance more difficult as the number of > > > > > platforms supported increases but also not feasible for ARM64. > > > > > > > > > > This DT binding aims at standardizing the system suspend for ARM > > > > > platforms. ARM64 platforms mandates entry-method property in DT for > > > > > this system suspend node. > > > > > > > > > > On system implementing PSCI as an enable-method to enter system > > > > > suspend, the PSCI CPU suspend method is used on versions upto v0.2 > > > > > and requires the power_state parameter to be passed to the PSCI CPU > > > > > suspend function. > > > > > > > > > > This parameter is platform specific, therefore must be provided by > > > > > firmware to the OS in order to enable proper call sequence. > > > > > > > > > > This ARM system suspend DT bindings rely on a property > > > > > (i.e. arm,psci-suspend-param) in the PSCI DT bindings that describes > > > > > how the PSCI CPU suspend power_state parameter should be defined in > > > > > DT. > > > > > > > > > > Signed-off-by: Sudeep Holla <sudeep.holla@xxxxxxx> > > > > > --- > > > > > Documentation/devicetree/bindings/arm/psci.txt | 11 +++ > > > > > .../devicetree/bindings/arm/system-suspend.txt | 93 > > > > > ++++++++++++++++++++++ 2 files changed, 104 insertions(+) > > > > > create mode 100644 > > > > > Documentation/devicetree/bindings/arm/system-suspend.txt > > > > > > > > > > diff --git a/Documentation/devicetree/bindings/arm/psci.txt > > > > > b/Documentation/devicetree/bindings/arm/psci.txt index > > > > > 5aa40ede0e99..bd3977a2a333 100644 --- > > > > > a/Documentation/devicetree/bindings/arm/psci.txt +++ > > > > > b/Documentation/devicetree/bindings/arm/psci.txt @@ -61,6 +61,14 @@ > > > > > Device tree nodes that require usage of PSCI CPU_SUSPEND function > > > > > (ie idle Definition: power_state parameter to pass to the PSCI > > > > > suspend call. > > > > > +PSCI v0.2 and earlier versions don't have explicit operation for > > > > > system +suspend. However, one can implement system suspend using > > > > > CPU_SUSPEND by +ensuring every other core except the one executing > > > > > the CPU_SUSPEND call +has called into PSCI through a CPU_OFF call. > > > > > > > > If users explicitly hot-unplug other cores when system load is low to > > > > save power, then we want to suspend at some point, how does the > > > > firmware know this case? > > > > > > Sorry for confusion. I mean > > > > > > If users explicitly hot-unplug other cores when system load is low to > > > save power, then at some point cpuidle want to suspend the cluster, how > > > does the distinguish this case with suspend the system to ram. > > > > Through the arm,psci-suspend-param DT property, ie PSCI CPU_SUSPEND > > power_state parameter. > > > > Did you read the patch :) ? > > Yep, I do read the patch ;) To be honest, I implemented the s2ram similar as > the patch does. But according to PSCI v0.2, "arm,psci-suspend-param = > <0x1010000>" means suspend the cluster. I'm not sure I understand it > correctly, "can implement system suspend using CPU_SUSPEND by ensuring > every other core except the one executing the CPU_SUSPEND call has called > into PSCI through a CPU_OFF call" intend to ask firmware to > > suspend the system if other cores has called into PSCI through a CPU_OFF > > or > > suspend the cpu cluster if other cores are not CPU_OFF. > > > I extend the PSCI CPU_SUSPEND function's to use power_state bit[26] to tell > firmware whether suspend to ram or not. > I read the PSCI spec again, power_state bit[0:15] is "platform specific ID", Is one of these bits used for suspend system? Thanks, Jisheng -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
