Adding a new driver for the MIPI CSI CD-PHY module v 0.5 embedded in some Mediatek soc, such as the MT8365 This driver was adapted from https://patchwork.kernel.org/project/linux-mediatek/cover/20200708104023.3225-1-louis.kuo@xxxxxxxxxxxx/ v1 can be found here: https://lore.kernel.org/all/20230403071929.360911-1-jstephan@xxxxxxxxxxxx/ v2 can be found here: https://lore.kernel.org/all/20230515090551.1251389-1-jstephan@xxxxxxxxxxxx/ v3 can be found here: https://lore.kernel.org/all/20230524083033.486490-1-jstephan@xxxxxxxxxxxx/ v4 can be found here: https://lore.kernel.org/linux-phy/20230620121928.1231745-1-jstephan@xxxxxxxxxxxx/ Changelog Changes in v5: - rebase on latest master scheduled for 6.8-rc1 - sort alphabetically CONFIG_PHY_MTK_MIPI_CSI_0_5 in Kconfig and Makefile - put lines under 100 chars on one line Changes in v4: include/dt-bindings/phy/phy.h: - remove commit adding PHY_TYPE_CDPHY definition Binding file: - use the standard phy-type property instead of a custom one so rename mediatek,phy-type -> phy-type - phy-type property is made optional: when present, describes the phy type and the operating mode - phy-cell is modified to accept a phy argument representing the phy operating mode if phy-type is not specified - adding new property num-lanes Driver: - add a custom xlate function to handle phy cells - update probe function to retrieve the new value phy-type instead of the mediatek,phy-type - remove useless struct define `struct mtk_mipi_dphy;` - rename some functin/variable from `xx_dphy_xx` to `xx_cdphy_xx` - update probe function to read num-lanes property Changes in v3: Binding file: - rename compatible string mediatek,phy-mipi-csi-0-5 -> mediatek,mt8365-csi-rx - rename binding file to be as compatible string - change property mediatek,is_cdphy -> mediatek,phy-type using an enum value instead of boolean for scalability - remove status property from example nodes - rename example node name 'mipi_rx_csi0: mipi_rx_csi0@11c10000' -> 'csi0_rx: phy@11c10000' - put reg address in lower case include/dt-bindings/phy/phy.h: - add PHY_TYPE_CDPHY definition Driver: - rename compatible string - rename property mediatek,is_cdphy -> mediatek,phy-type - rename CSIx* macro to CSIX* (x -> X) - fix style issue on the driver data structure - update MODULE_DESCRIPTION as suggested by Angelo and update the kconfig module description to match it - add dphy /cdphy eq tuning function to factor the code and increase readability - fix typo __PHY_MTK__MIPI_CSI__C_0_5_RX_REG_H_ --> __PHY_MTK_MIPI_CSI_V_0_5_RX_REG_H_ - reword commit message to update my contributions - added missing copyright - added module name in Kconfig Changes in v2: - fix all comments on bindings - move the binding chunk from driver to binding commit - fix dt_binding_check error (reported by DT_CHECKER_FLAGS) - use a more generic compatible string - add a new dt properties to simplify the driver "mediatek,is_cdphy" - rename the driver and the corresponding file to include version - drop of_match_ptr() - use devm_platform_ioremap_resource - use phy-mtk-io.h api instead of regmap - rework the driver to use dt nodes to declare PHY instead of an array in the driver - remove useless define for unused registers - remove support for CSI0A/B because it cannot be tested, and it simplifies the driver for a first review - edit commit message and bindings to be more descriptive about the hardware Florian Sylvestre (1): dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5 Phi-bang Nguyen (1): phy: mtk-mipi-csi: add driver for CSI phy .../bindings/phy/mediatek,mt8365-csi-rx.yaml | 79 +++++ MAINTAINERS | 7 + drivers/phy/mediatek/Kconfig | 12 + drivers/phy/mediatek/Makefile | 2 + .../mediatek/phy-mtk-mipi-csi-0-5-rx-reg.h | 62 ++++ drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c | 294 ++++++++++++++++++ 6 files changed, 456 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi-0-5-rx-reg.h create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c -- 2.43.0
