Re: [PATCH] ARM: dts: exynos5422-odroidxu3: add sound nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi,

Thanks for your comment.

On Wed, 21 Jan 2015 12:41:55 +0100
Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx> wrote:

> Hi,
> 
> On 21/01/15 06:58, Inha Song wrote:
> > Add MAX98090 audio codec, I2S interface and the sound nodes to support
> > audio on Odroid-XU3 board.
> > 
> > Signed-off-by: Inha Song <ideal.song@xxxxxxxxxxx>
> > ---
> >  arch/arm/boot/dts/exynos5422-odroidxu3.dts | 34 ++++++++++++++++++++++++++++++
> >  1 file changed, 34 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
> > index 7874da2..79493d1 100644
> > --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
> > +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
> > @@ -310,6 +310,40 @@
> >  	rtc@101E0000 {
> >  		status = "okay";
> >  	};
> > +
> > +	sound: sound {
> > +		compatible = "samsung,odroidu3-audio";
> 
> How about using simple-card instead ? I've been trying to switch
> Odroid X2/U3 to simple card. Here a corresponding dts patch:
> http://www.spinics.net/lists/linux-samsung-soc/msg41083.html
> For that recent patches for the I2S driver which area already in -next
> might be needed.

Oh, I missed your patchs.
I will rework this patch based on your patch.

Best Regards,
Inha Song.

> 
> > +		samsung,model = "Odroid-XU3";
> > +		samsung,i2s-controller = <&i2s0>;
> > +		samsung,audio-codec = <&max98090>;
> > +		assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
> > +				  <&clock_audss EXYNOS_MOUT_I2S>;
> > +		assigned-clock-parents = <&clock CLK_FIN_PLL>,
> > +				<&clock_audss EXYNOS_MOUT_AUDSS>;
> > +		samsung,audio-routing =
> > +			"Headphone Jack", "HPL",
> > +			"Headphone Jack", "HPR",
> > +			"Headphone Jack", "MICBIAS",
> > +			"IN1", "Headphone Jack",
> > +			"Speakers", "SPKL",
> > +			"Speakers", "SPKR";
> > +	};
> > +};
> > +
> > +&hsi2c_5 {
> > +	status = "okay";
> > +	max98090: max98090@10 {
> > +		compatible = "maxim,max98090";
> > +		reg = <0x10>;
> > +		interrupt-parent = <&gpx3>;
> > +		interrupts = <2 0>;
> > +		clocks = <&clock_audss EXYNOS_DOUT_AUD_BUS>;
> > +		clock-names = "mclk";
> > +	};
> > +};
> 
> -- 
> Thanks,
> Sylwester
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux