Enable mmc device found on ipq6018 devices. This node supports both eMMC and SD cards. Tested with: eMMC (HS200) SD Card (SDR50/SDR104) Signed-off-by: Chukun Pan <amadeus@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index 5e1277fea725..39fb38914a1e 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -436,6 +436,28 @@ dwc_1: usb@7000000 { }; }; + sdhc: mmc@7804000 { + compatible = "qcom,ipq6018-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x7804000 0x0 0x1000>, + <0x0 0x7805000 0x0 0x1000>; + reg-names = "hc", "cqhci"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC1_BCR>; + max-frequency = <192000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + status = "disabled"; + }; + blsp_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0 0x07884000 0x0 0x2b000>; -- 2.25.1