According to i.MX8MP RM and HDMI ADD, the fdcc clock is part of
hdmi rx verification IP that should not enable for HDMI TX.
But actually if the clock is disabled before HDMI/LCDIF probe,
LCDIF will not get pixel clock from HDMI PHY and print the error
logs:
[CRTC:39:crtc-2] vblank wait timed out
WARNING: CPU: 2 PID: 9 at drivers/gpu/drm/drm_atomic_helper.c:1634 drm_atomic_helper_wait_for_vblanks.part.0+0x23c/0x260
Add fdcc clock to LCDIF and HDMI TX power domains to fix the issue.
Signed-off-by: Sandor Yu <Sandor.yu@xxxxxxx>
Reviewed-by: Jacky Bai <ping.bai@xxxxxxx>
Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
---
The original work was from Sandor on the NXP Down-stream kernel
diff --git a/drivers/pmdomain/imx/imx8mp-blk-ctrl.c b/drivers/pmdomain/imx/imx8mp-blk-ctrl.c
index e3203eb6a022..a56f7f92d091 100644
--- a/drivers/pmdomain/imx/imx8mp-blk-ctrl.c
+++ b/drivers/pmdomain/imx/imx8mp-blk-ctrl.c
@@ -55,7 +55,7 @@ struct imx8mp_blk_ctrl_domain_data {
const char *gpc_name;
};
-#define DOMAIN_MAX_CLKS 2
+#define DOMAIN_MAX_CLKS 3
#define DOMAIN_MAX_PATHS 3
struct imx8mp_blk_ctrl_domain {
@@ -457,8 +457,8 @@ static const struct imx8mp_blk_ctrl_domain_data imx8mp_hdmi_domain_data[] = {
},
[IMX8MP_HDMIBLK_PD_LCDIF] = {
.name = "hdmiblk-lcdif",
- .clk_names = (const char *[]){ "axi", "apb" },
- .num_clks = 2,
+ .clk_names = (const char *[]){ "axi", "apb", "fdcc" },
+ .num_clks = 3,
.gpc_name = "lcdif",
.path_names = (const char *[]){"lcdif-hdmi"},
.num_paths = 1,
@@ -483,8 +483,8 @@ static const struct imx8mp_blk_ctrl_domain_data imx8mp_hdmi_domain_data[] = {
},
[IMX8MP_HDMIBLK_PD_HDMI_TX] = {
.name = "hdmiblk-hdmi-tx",
- .clk_names = (const char *[]){ "apb", "ref_266m" },
- .num_clks = 2,
+ .clk_names = (const char *[]){ "apb", "ref_266m", "fdcc" },
+ .num_clks = 3,
.gpc_name = "hdmi-tx",
},
[IMX8MP_HDMIBLK_PD_HDMI_TX_PHY] = {
--
2.43.0
