Hi,
On 21/12/2023 13:30, Jayesh Choudhary wrote:
VP2 and VP3 are unused video ports and VP3 share the same parent
clock as VP1 causing issue with pixel clock setting for HDMI (VP1).
So remove the parent clocks for unused VPs.
Fixes: 6f8605fd7d11 ("arm64: dts: ti: k3-am69-sk: Add DP and HDMI support")
Reported-by: Nishanth Menon <nm@xxxxxx>
Closes: https://storage.kernelci.org/mainline/master/v6.7-rc6/arm64/defconfig/gcc-10/lab-ti/baseline-nfs-am69_sk-fs.txt
Signed-off-by: Jayesh Choudhary <j-choudhary@xxxxxx>
---
Local testing log for HDMI on AM69-SK:
<https://gist.github.com/Jayesh2000/517395cd85eb28d65b8ee4568cefb809>
arch/arm64/boot/dts/ti/k3-am69-sk.dts | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index 8da591579868..370980eb59b0 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -918,13 +918,9 @@ &dss {
pinctrl-names = "default";
pinctrl-0 = <&dss_vout0_pins_default>;
assigned-clocks = <&k3_clks 218 2>,
- <&k3_clks 218 5>,
- <&k3_clks 218 14>,
- <&k3_clks 218 18>;
+ <&k3_clks 218 5>;
assigned-clock-parents = <&k3_clks 218 3>,
- <&k3_clks 218 7>,
- <&k3_clks 218 16>,
- <&k3_clks 218 22>;
+ <&k3_clks 218 7>;
};
&serdes_wiz4 {
The SK has two outputs, using VP0 and VP1, so the above kind of makes
sense. Then again, setting up 4 clocks here really shouldn't break the
SK, should it? The AM69 has 4 available VPs. How does one configure the
clocks for a board that uses 4 VPs, or possibly a different selection of
VPs?
I think the patch desc should explain why this doesn't work. Afaik, the
dts is not wrong as such, but there's an underlying issue that breaks
the clocking if all four clocks are set up here.
So, with the desc updated, as this fixes an issue and is not wrong:
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
But I also feel this is dodging a firmware (?) issue.
Tomi
