Re: [PATCH 0/3] Fairphone 5 PMIC-GLINK support (USB-C, charger, fuel gauge)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 21, 2023 at 02:45:26PM +0100, Luca Weiss wrote:
> On Thu Dec 21, 2023 at 1:53 PM CET, Konrad Dybcio wrote:
> > On 21.12.2023 11:34, Dmitry Baryshkov wrote:
> > > On Thu, 21 Dec 2023 at 09:33, Luca Weiss <luca.weiss@xxxxxxxxxxxxx> wrote:
> > >>
> > >> On Wed Dec 20, 2023 at 1:32 PM CET, Konrad Dybcio wrote:
> > >>> On 20.12.2023 11:02, Luca Weiss wrote:
> > >>>> This series adds all the necessary bits to enable USB-C role switching,
> > >>>> charger and fuel gauge (all via pmic-glink) on Fairphone 5.
> > >>>>
> > >>>> One thing that could be made different is the pmic-glink compatible.
> > >>>> I've chosen to use qcm6490 compatible for it and not sc7280 since
> > >>>> there's plenty of firmware variety on sc7280-based platforms and they
> > >>>> might require different quirks in the future, so limit this PDOS quirk
> > >>>> to just qcm6490 for now.
> > >>>>
> > >>>> If someone thinks it should be qcom,sc7280-pmic-glink, please let me
> > >>>> know :)
> > >>> IMO it's best to continue using the "base soc" (which just so happened
> > >>> to fall onto sc7280 this time around) for all compatibles, unless the
> > >>> derivatives actually had changes
> > >>
> > >> Hi Konrad,
> > >>
> > >> I think at some point I asked Dmitry what he thought and he mentioned
> > >> qcm6490. Even found the message again:
> > >>
> > >>> well, since it is a firmware thing, you might want to emphasise that.
> > >>> So from my POV qcm6490 makes more sense
> > >>
> > >> But yeah since it's likely that sc7280 firmware behaves the same as
> > >> qcm6490 firmware it's probably okay to use sc7280 compatible, worst case
> > >> we change it later :) I'll send a v2 with those changes.
> > > 
> > > Worst case we end up with sc7280 which has yet another slightly
> > > different UCSI / PMIC GLINK implementation, but the compatible string
> > > is already taken.
> > > I still suppose that this should be a qcm6490-related string.
> > Right, let's keep qcm then
> 
> Ack from my side also. Thanks for the feedback!

This doesn't apply to my tree, where should it be going through?

thanks,
greg k-h




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux