On 12/27/23 9:03 AM, Chunfeng Yun wrote: > For Gen1 isoc-in endpoint on controller before about SSUSB IPM v1.6.0, it > still send out unexpected ACK after receiving a short packet in burst > transfer, this will cause an exception on connected device, specially for > a 4k camera. > Add a quirk property "rx-fifo-depth" to work around this hardware issue, > prefer to use 3k bytes; > The side-effect is that may cause performance drop about 10%, including That it may cause? > bulk transfer. > > Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> > --- > v4: change rx-fifo size in bytes > v3: add fifo depth unit, change the value range from 0-3 to 1-4 > v2: change 'mediatek,rxfifo-depth' to 'rx-fifo-depth' > --- > .../devicetree/bindings/usb/mediatek,mtk-xhci.yaml | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml > index e9644e333d78..9f621f2209df 100644 > --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml > +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml > @@ -124,6 +124,17 @@ properties: > defined in the xHCI spec on MTK's controller. > default: 5000 > > + rx-fifo-depth: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + It is a quirk used to work around Gen1 isoc-in endpoint transfer issue > + that still send out unexpected ACK after device finish the burst transfer Finishes. > + with a short packet and cause an exception, specially on a 4K camera > + device, it happens on controller before about IPM v1.6.0; the side-effect > + is that may cause performance drop about 10%, include bulk transfer, That it may cause? And including? [...] MBR, Sergey