On Sat, Dec 23, 2023 at 11:12:13PM +0100, Andreas Kemnade wrote: > The display is in landscape orientation, but the touchscreen is in portrait > orientation. Specify that properly in the devicetree. This needs to be merged by the board maintainer. > > Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx> > --- > arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts > index 815119c12bd48..5636fb3661e8a 100644 > --- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts > +++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts > @@ -141,8 +141,10 @@ zforce: touchscreen@50 { > interrupts = <6 IRQ_TYPE_EDGE_FALLING>; Could you please prepare a patch changing this to IRQ_TYPE_LEVEL_LOW to match what the driver is actually doing? > vdd-supply = <&ldo1_reg>; > reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; > - x-size = <1072>; > - y-size = <1448>; > + touchscreen-size-x = <1072>; > + touchscreen-size-y = <1448>; > + touchscreen-swapped-x-y; > + touchscreen-inverted-x; > }; > > /* TODO: TPS65185 PMIC for E Ink at 0x68 */ > -- > 2.39.2 > Thanks. -- Dmitry