Add an hdmi-connector node and enable the hdmi, display-subsystem and vop
nodes.
Signed-off-by: Alex Bee <knaerzche@xxxxxxxxx>
---
changes in v2:
- no changes
changes in v3:
- no changes
changes in v4:
- none
.../arm/boot/dts/rockchip/rk3128-xpi-3128.dts | 29 +++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
index 03a97881519a..21c1678f4e91 100644
--- a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
+++ b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
@@ -47,6 +47,17 @@ dc_5v: dc-5v-regulator {
regulator-boot-on;
};
+ hdmi-connnector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_connector_out>;
+ };
+ };
+ };
+
/*
* This is a vbus-supply, which also supplies the GL852G usb hub,
* thus has to be always-on
@@ -239,6 +250,10 @@ &cpu0 {
cpu-supply = <&vdd_arm>;
};
+&display_subsystem {
+ status = "okay";
+};
+
&emmc {
bus-width = <8>;
vmmc-supply = <&vcc_io>;
@@ -328,6 +343,16 @@ &gpu {
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_connector_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
&mdio {
phy0: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
@@ -423,3 +448,7 @@ &usb2phy_host {
&usb2phy_otg {
status = "okay";
};
+
+&vop {
+ status = "okay";
+};
--
2.43.0
