[PATCH v5 05/16] PCI: imx6: Using "linux,pci-domain" as slot ID

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Avoid use get slot id by compared with register physical address. If there
are more than 2 slots, compared logic will become complex.

"linux,pci-domain" already exist at dts since commit:
	commit (c0b70f05c87f3b arm64: dts: imx8mq: use_dt_domains for pci node).

So it is safe to remove compare basic address code:
	...
	if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
		imx6_pcie->controller_id = 1;
	...

Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---

Notes:
    Change from v3 to v4
    - remove compare basic address logic
    Change from v2 to v3
    - none
    Change from v1 to v2
    - fix of_get_pci_domain_nr return value check logic

 drivers/pci/controller/dwc/pci-imx6.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 294f61a9c6fd9..332c392f8e5bc 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -33,6 +33,7 @@
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
 
+#include "../../pci.h"
 #include "pcie-designware.h"
 
 #define IMX8MQ_GPR_PCIE_REF_USE_PAD		BIT(9)
@@ -40,7 +41,6 @@
 #define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE	BIT(11)
 #define IMX8MQ_GPR_PCIE_VREG_BYPASS		BIT(12)
 #define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE	GENMASK(11, 8)
-#define IMX8MQ_PCIE2_BASE_ADDR			0x33c00000
 
 #define to_imx6_pcie(x)	dev_get_drvdata((x)->dev)
 
@@ -1279,13 +1279,14 @@ static int imx6_pcie_probe(struct platform_device *pdev)
 					     "Failed to get PCIEPHY reset control\n");
 	}
 
-	switch (imx6_pcie->drvdata->variant) {
-	case IMX7D:
-		if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
-			imx6_pcie->controller_id = 1;
-	default:
-		break;
-	}
+	/* Using linux,pci-domain as PCI slot id */
+	imx6_pcie->controller_id = of_get_pci_domain_nr(node);
+	/* If there are not "linux,pci-domain" in dts file, means only 1 controller */
+	if (imx6_pcie->controller_id == -EINVAL)
+		imx6_pcie->controller_id = 0;
+	else if (imx6_pcie->controller_id < 0)
+		return dev_err_probe(dev, imx6_pcie->controller_id,
+				     "linux,pci-domain have wrong value\n");
 
 	/* Grab turnoff reset */
 	imx6_pcie->turnoff_reset = devm_reset_control_get_optional_exclusive(dev, "turnoff");
-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux