On Tue, Dec 19, 2023 at 9:37 PM Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> wrote: > > On 18/12/2023 02:52, Binbin Zhou wrote: > > Add DeviceTree file for Loongson-2K0500 processor, which integrates one > > 64-bit dual emission superscalar LA264 processor core. > > > > Signed-off-by: Binbin Zhou <zhoubinbin@xxxxxxxxxxx> > > --- > > arch/loongarch/boot/dts/Makefile | 2 + > > .../boot/dts/loongson-2k0500-ref.dts | 89 ++++++ > > arch/loongarch/boot/dts/loongson-2k0500.dtsi | 274 ++++++++++++++++++ > > 3 files changed, 365 insertions(+) > > create mode 100644 arch/loongarch/boot/dts/loongson-2k0500-ref.dts > > create mode 100644 arch/loongarch/boot/dts/loongson-2k0500.dtsi > > > > diff --git a/arch/loongarch/boot/dts/Makefile b/arch/loongarch/boot/dts/Makefile > > index 1e24cdb5180a..aa0b21d73d4e 100644 > > --- a/arch/loongarch/boot/dts/Makefile > > +++ b/arch/loongarch/boot/dts/Makefile > > @@ -1,3 +1,5 @@ > > # SPDX-License-Identifier: GPL-2.0-only > > > > +dtb-$(CONFIG_MACH_LOONGSON64) = loongson-2k0500-ref.dtb > > + > > obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_NAME)) > > diff --git a/arch/loongarch/boot/dts/loongson-2k0500-ref.dts b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts > > new file mode 100644 > > index 000000000000..52483127a419 > > --- /dev/null > > +++ b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts > > @@ -0,0 +1,89 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright (C) 2023 Loongson Technology Corporation Limited > > + */ > > + > > +/dts-v1/; > > + > > +#include "loongson-2k0500.dtsi" > > + > > +/ { > > + compatible = "loongson,ls2k0500-ref", "loongson,ls2k0500"; > > + model = "Loongson-2K0500 Reference Board"; > > + > > + aliases { > > + ethernet0 = &gmac0; > > + ethernet1 = &gmac1; > > + serial0 = &uart0; > > + }; > > + > > + chosen { > > + stdout-path = "serial0:115200n8"; > > + bootargs = "console=ttyS0,115200"; > > You received here comments already: > https://lore.kernel.org/all/3543cbf9-d259-8d0f-e78e-d8d5e3f501de@xxxxxxxxxx/ > > Don't waste our time to re-review the same mistakes over and over again. > > Hi Krzysztof: I am sorry for this, I misunderstood before that `earlycon` is not allowed. BTW, is there a note about not using the `bootargs` attribute? I didn't find it in the Documentation. > > ... > > > + > > + i2c@1ff4a800 { > > + compatible = "loongson,ls2k-i2c"; > > + reg = <0x0 0x1ff4a800 0x0 0x0800>; > > + interrupt-parent = <&eiointc>; > > + interrupts = <19>; > > + status = "disabled"; > > + }; > > + > > + pmc: power-management@1ff6c000 { > > + compatible = "loongson,ls2k0500-pmc", "syscon"; > > It does not look like you tested the DTS against bindings. Please run > `make dtbs_check W=1` (see > Documentation/devicetree/bindings/writing-schema.rst or > https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/ > for instructions). Emm... Here is the compatible description from the latest kernel: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml#n13 I think this compatible should be fine, also, I ensure that `make dtbs_check W=1` is fine before committing. Thanks. Binbin > > Or you did not test your DTS on the hardware. > > > + reg = <0x0 0x1ff6c000 0x0 0x58>; > > + interrupt-parent = <&eiointc>; > > + interrupts = <56>; > > + loongson,suspend-address = <0x0 0x1c000500>; > > + > > + syscon-reboot { > > > > Best regards, > Krzysztof >