[PATCH v5 4/7] LoongArch: dts: DeviceTree for Loongson-2K0500

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add DeviceTree file for Loongson-2K0500 processor, which integrates one
64-bit dual emission superscalar LA264 processor core.

Signed-off-by: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
---
 arch/loongarch/boot/dts/Makefile              |   2 +
 .../boot/dts/loongson-2k0500-ref.dts          |  89 ++++++
 arch/loongarch/boot/dts/loongson-2k0500.dtsi  | 274 ++++++++++++++++++
 3 files changed, 365 insertions(+)
 create mode 100644 arch/loongarch/boot/dts/loongson-2k0500-ref.dts
 create mode 100644 arch/loongarch/boot/dts/loongson-2k0500.dtsi

diff --git a/arch/loongarch/boot/dts/Makefile b/arch/loongarch/boot/dts/Makefile
index 1e24cdb5180a..aa0b21d73d4e 100644
--- a/arch/loongarch/boot/dts/Makefile
+++ b/arch/loongarch/boot/dts/Makefile
@@ -1,3 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
+dtb-$(CONFIG_MACH_LOONGSON64)	= loongson-2k0500-ref.dtb
+
 obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_NAME))
diff --git a/arch/loongarch/boot/dts/loongson-2k0500-ref.dts b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
new file mode 100644
index 000000000000..52483127a419
--- /dev/null
+++ b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include "loongson-2k0500.dtsi"
+
+/ {
+	compatible = "loongson,ls2k0500-ref", "loongson,ls2k0500";
+	model = "Loongson-2K0500 Reference Board";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@200000 {
+		device_type = "memory";
+		reg = <0x0 0x00200000 0x0 0x0ee00000>,
+		      <0x0 0x90000000 0x0 0x60000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x2000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&gmac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	bus_id = <0x0>;
+};
+
+&gmac1 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	bus_id = <0x1>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	eeprom@57{
+		compatible = "atmel,24c16";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
diff --git a/arch/loongarch/boot/dts/loongson-2k0500.dtsi b/arch/loongarch/boot/dts/loongson-2k0500.dtsi
new file mode 100644
index 000000000000..1dcb6a20fc6c
--- /dev/null
+++ b/arch/loongarch/boot/dts/loongson-2k0500.dtsi
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "loongson,la264";
+			device_type = "cpu";
+			reg = <0x0>;
+			clocks = <&cpu_clk>;
+		};
+	};
+
+	cpu_clk: cpu-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <500000000>;
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "loongson,cpu-interrupt-controller";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+	};
+
+	bus@10000000 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
+			 <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>,
+			 <0x0 0x20000000 0x0 0x20000000 0x0 0x10000000>,
+			 <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>,
+			 <0xfe 0x0 0xfe 0x0 0x0 0x40000000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		isa@16400000 {
+			compatible = "isa";
+			#size-cells = <1>;
+			#address-cells = <2>;
+			ranges = <1 0x0 0x0 0x16400000 0x4000>;
+		};
+
+		liointc0: interrupt-controller@1fe11400 {
+			compatible = "loongson,liointc-2.0";
+			reg = <0x0 0x1fe11400 0x0 0x40>,
+			      <0x0 0x1fe11040 0x0 0x8>;
+			reg-names = "main", "isr0";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+			interrupt-names = "int0";
+
+			loongson,parent_int_map = <0xffffffff>, /* int0 */
+						  <0x00000000>, /* int1 */
+						  <0x00000000>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		liointc1: interrupt-controller@1fe11440 {
+			compatible = "loongson,liointc-2.0";
+			reg = <0x0 0x1fe11440 0x0 0x40>,
+			      <0x0 0x1fe11048 0x0 0x8>;
+			reg-names = "main", "isr0";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <4>;
+			interrupt-names = "int2";
+
+			loongson,parent_int_map = <0x00000000>, /* int0 */
+						  <0x00000000>, /* int1 */
+						  <0xffffffff>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		eiointc: interrupt-controller@1fe11600 {
+			compatible = "loongson,ls2k0500-eiointc";
+			reg = <0x0 0x1fe11600 0x0 0xea00>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <3>;
+		};
+
+		gmac0: ethernet@1f020000 {
+			compatible = "snps,dwmac-3.70a";
+			reg = <0x0 0x1f020000 0x0 0x10000>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac1: ethernet@1f030000 {
+			compatible = "snps,dwmac-3.70a";
+			reg = <0x0 0x1f030000 0x0 0x10000>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		sata: sata@1f040000 {
+			compatible = "snps,spear-ahci";
+			reg = <0x0 0x1f040000 0x0 0x10000>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <75>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1f050000 {
+			compatible = "generic-ehci";
+			reg = <0x0 0x1f050000 0x0 0x8000>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <71>;
+			status = "disabled";
+		};
+
+		ohci0: usb@1f058000 {
+			compatible = "generic-ohci";
+			reg = <0x0 0x1f058000 0x0 0x8000>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <72>;
+			status = "disabled";
+		};
+
+		uart0: serial@1ff40800 {
+			compatible = "ns16550a";
+			reg = <0x0 0x1ff40800 0x0 0x10>;
+			clock-frequency = <100000000>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <2>;
+			no-loopback-test;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1ff48000 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff48000 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <14>;
+			status = "disabled";
+		};
+
+		i2c@1ff48800 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff48800 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <15>;
+			status = "disabled";
+		};
+
+		i2c@1ff49000 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff49000 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <16>;
+			status = "disabled";
+		};
+
+		i2c@1ff49800 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff49800 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <17>;
+			status = "disabled";
+		};
+
+		i2c@1ff4a000 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff4a000 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <18>;
+			status = "disabled";
+		};
+
+		i2c@1ff4a800 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff4a800 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <19>;
+			status = "disabled";
+		};
+
+		pmc: power-management@1ff6c000 {
+			compatible = "loongson,ls2k0500-pmc", "syscon";
+			reg = <0x0 0x1ff6c000 0x0 0x58>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <56>;
+			loongson,suspend-address = <0x0 0x1c000500>;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x30>;
+				mask = <0x1>;
+			};
+
+			syscon-poweroff {
+				compatible = "syscon-poweroff";
+				regmap = <&pmc>;
+				offset = <0x14>;
+				mask = <0x3c00>;
+				value = <0x3c00>;
+			};
+		};
+
+		rtc0: rtc@1ff6c100 {
+			compatible = "loongson,ls2k0500-rtc", "loongson,ls7a-rtc";
+			reg = <0x0 0x1ff6c100 0x0 0x100>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <35>;
+			status = "disabled";
+		};
+
+		pcie@1a000000 {
+			compatible = "loongson,ls2k-pci";
+			reg = <0x0 0x1a000000 0x0 0x02000000>,
+			      <0xfe 0x0 0x0 0x20000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x0 0x5>;
+			ranges = <0x01000000 0x0 0x00004000 0x0 0x16404000 0x0 0x00004000>,
+				 <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>;
+
+			pcie@0,0 {
+				reg = <0x0000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&eiointc>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &eiointc 81>;
+				ranges;
+			};
+
+			pcie@1,0 {
+				reg = <0x0800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&eiointc>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &eiointc 82>;
+				ranges;
+			};
+		};
+	};
+};
-- 
2.39.3





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux