ChangeLog
- add honeywell,pressure-triplet property that autoconfigures pmin, pmax
just like the hsc030pa sensor driver
- add support for spi-based sensors
Datasheet:
https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf
Signed-off-by: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
---
.../iio/pressure/honeywell,mprls0025pa.yaml | 60 ++++++++++++++++---
1 file changed, 52 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
index d9e903fbfd99..7c4be2dec174 100644
--- a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
@@ -53,33 +53,59 @@ properties:
honeywell,pmin-pascal:
description:
Minimum pressure value the sensor can measure in pascal.
+ To be specified only if honeywell,pressure-triplet is set to "NA".
honeywell,pmax-pascal:
description:
Maximum pressure value the sensor can measure in pascal.
+ To be specified only if honeywell,pressure-triplet is set to "NA".
honeywell,transfer-function:
description: |
- Transfer function which defines the range of valid values delivered by the
- sensor.
+ Transfer function which defines the range of valid values delivered by
+ the sensor.
1 - A, 10% to 90% of 2^24 (1677722 .. 15099494)
2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874)
3 - C, 20% to 80% of 2^24 (3355443 .. 13421773)
+ enum: [1, 2, 3]
$ref: /schemas/types.yaml#/definitions/uint32
+ honeywell,pressure-triplet:
+ description: |
+ Case-sensitive five character string that defines pressure range, unit
+ and type as part of the device nomenclature. In the unlikely case of a
+ custom chip, set to "NA" and provide pmin-pascal and pmax-pascal.
+ enum: [0001BA, 01.6BA, 02.5BA, 0060MG, 0100MG, 0160MG, 0250MG, 0400MG,
+ 0600MG, 0001BG, 01.6BG, 02.5BG, 0100KA, 0160KA, 0250KA, 0006KG,
+ 0010KG, 0016KG, 0025KG, 0040KG, 0060KG, 0100KG, 0160KG, 0250KG,
+ 0015PA, 0025PA, 0030PA, 0001PG, 0005PG, 0015PG, 0030PG, 0300YG,
+ NA]
+ $ref: /schemas/types.yaml#/definitions/string
+
+ spi-max-frequency:
+ maximum: 800000
+
vdd-supply:
description: provide VDD power to the sensor.
required:
- compatible
- reg
- - honeywell,pmin-pascal
- - honeywell,pmax-pascal
+ - honeywell,pressure-triplet
- honeywell,transfer-function
- - vdd-supply
additionalProperties: false
+dependentSchemas:
+ honeywell,pmin-pascal:
+ properties:
+ honeywell,pressure-triplet:
+ const: NA
+ honeywell,pmax-pascal:
+ properties:
+ honeywell,pressure-triplet:
+ const: NA
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
@@ -93,10 +119,28 @@ examples:
reg = <0x18>;
reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
interrupt-parent = <&gpio3>;
- interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
- honeywell,pmin-pascal = <0>;
- honeywell,pmax-pascal = <172369>;
+ interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+ honeywell,pressure-triplet = "0025PA";
honeywell,transfer-function = <1>;
vdd-supply = <&vcc_3v3>;
};
};
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pressure@0 {
+ compatible = "honeywell,mprls0025pa";
+ reg = <0>;
+ spi-max-frequency = <800000>;
+ reset-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <30 IRQ_TYPE_EDGE_RISING>;
+
+ honeywell,pressure-triplet = "0015PA";
+ honeywell,transfer-function = <1>;
+ };
+ };
+...
--
2.41.0
