[PATCH v2 2/2] hwmon: Driver for Nuvoton NCT7363Y

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ban Feng <kcfeng0@xxxxxxxxxxx>

NCT7363Y is an I2C based hardware monitoring chip from Nuvoton.

Signed-off-by: Ban Feng <kcfeng0@xxxxxxxxxxx>
---
 Documentation/hwmon/index.rst   |   1 +
 Documentation/hwmon/nct7363.rst |  33 ++
 MAINTAINERS                     |   2 +
 drivers/hwmon/Kconfig           |  11 +
 drivers/hwmon/Makefile          |   1 +
 drivers/hwmon/nct7363.c         | 515 ++++++++++++++++++++++++++++++++
 6 files changed, 563 insertions(+)
 create mode 100644 Documentation/hwmon/nct7363.rst
 create mode 100644 drivers/hwmon/nct7363.c

diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 72f4e6065bae..178d3cae95de 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -161,6 +161,7 @@ Hardware Monitoring Kernel Drivers
    mp5023
    nct6683
    nct6775
+   nct7363
    nct7802
    nct7904
    npcm750-pwm-fan
diff --git a/Documentation/hwmon/nct7363.rst b/Documentation/hwmon/nct7363.rst
new file mode 100644
index 000000000000..89699c95aa4b
--- /dev/null
+++ b/Documentation/hwmon/nct7363.rst
@@ -0,0 +1,33 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver nct7363
+=====================
+
+Supported chip:
+
+  * Nuvoton NCT7363Y
+
+    Prefix: nct7363
+
+    Addresses: I2C 0x20, 0x21, 0x22, 0x23
+
+Author: Ban Feng <kcfeng0@xxxxxxxxxxx>
+
+
+Description
+-----------
+
+The NCT7363Y is a Fan controller which provides up to 16 independent
+FAN input monitors, and up to 16 independent PWM output with SMBus interface.
+
+
+Sysfs entries
+-------------
+
+Currently, the driver supports the following features:
+
+======================= =======================================================
+fanX_input		provide current fan rotation value in RPM
+
+pwmX			get or set PWM fan control value.
+======================= =======================================================
diff --git a/MAINTAINERS b/MAINTAINERS
index c4081a45445e..c7f1293d5b3f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14843,6 +14843,8 @@ M:	Ban Feng <kcfeng0@xxxxxxxxxxx>
 L:	linux-hwmon@xxxxxxxxxxxxxxx
 S:	Maintained
 F:	Documentation/devicetree/bindings/hwmon/nuvoton,nct736x.yaml
+F:	Documentation/hwmon/nct7363.rst
+F:	drivers/hwmon/nct7363.c
 
 NETDEVSIM
 M:	Jakub Kicinski <kuba@xxxxxxxxxx>
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index cf27523eed5a..58a13c393a8e 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1605,6 +1605,17 @@ config SENSORS_NCT6775_I2C
 	  This driver can also be built as a module. If so, the module
 	  will be called nct6775-i2c.
 
+config SENSORS_NCT7363
+	tristate "Nuvoton NCT7363Y"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the Nuvoton NCT7363Y,
+	  hardware monitoring chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nct736x.
+
 config SENSORS_NCT7802
 	tristate "Nuvoton NCT7802Y"
 	depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index e84bd9685b5c..dd794aa06209 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -166,6 +166,7 @@ obj-$(CONFIG_SENSORS_NCT6775_CORE) += nct6775-core.o
 nct6775-objs			:= nct6775-platform.o
 obj-$(CONFIG_SENSORS_NCT6775)	+= nct6775.o
 obj-$(CONFIG_SENSORS_NCT6775_I2C) += nct6775-i2c.o
+obj-$(CONFIG_SENSORS_NCT7363)	+= nct7363.o
 obj-$(CONFIG_SENSORS_NCT7802)	+= nct7802.o
 obj-$(CONFIG_SENSORS_NCT7904)	+= nct7904.o
 obj-$(CONFIG_SENSORS_NPCM7XX)	+= npcm750-pwm-fan.o
diff --git a/drivers/hwmon/nct7363.c b/drivers/hwmon/nct7363.c
new file mode 100644
index 000000000000..1bf6e83afd7f
--- /dev/null
+++ b/drivers/hwmon/nct7363.c
@@ -0,0 +1,515 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2023 Nuvoton Technology corporation.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/i2c.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define NCT7363_REG_GPIO_0_3		0x20
+#define NCT7363_REG_GPIO_4_7		0x21
+#define NCT7363_REG_GPIO_10_13		0x22
+#define NCT7363_REG_GPIO_14_17		0x23
+#define NCT7363_REG_PWMEN_0_7		0x38
+#define NCT7363_REG_PWMEN_8_15		0x39
+#define NCT7363_REG_FANINEN_0_7		0x41
+#define NCT7363_REG_FANINEN_8_15	0x42
+#define NCT7363_REG_FANINx_HVAL(x)	(0x48 + ((x) * 2))
+#define NCT7363_REG_FANINx_LVAL(x)	(0x49 + ((x) * 2))
+#define NCT7363_REG_FSCPxDUTY(x)	(0x90 + ((x) * 2))
+#define NCT7363_REG_VENDOR_ID		0xFD
+#define NCT7363_REG_CHIP_ID		0xFE
+#define NCT7363_REG_DEVICE_ID		0xFF
+
+#define NUVOTON_ID			0x49
+#define CHIP_ID				0x19
+#define DEVICE_ID			0x88
+
+#define PWM_SEL(x)			(BIT(0) << ((x % 4) * 2))
+#define FANIN_SEL(x)			(BIT(1) << ((x % 4) * 2))
+#define BIT_CHECK(x)			(BIT(0) << x)
+
+#define NCT7363_FANINx_LVAL_MASK	GENMASK(4, 0)
+#define NCT7363_FANIN_MASK		GENMASK(12, 0)
+
+#define NCT7363_PWM_COUNT		16
+#define NCT7363_FANIN_COUNT		16
+
+#define REFRESH_INTERVAL		(2 * HZ)
+
+static inline unsigned long FAN_FROM_REG(u16 val)
+{
+	if ((val >= NCT7363_FANIN_MASK) || (val == 0))
+		return	0;
+
+	return (1350000UL / val);
+}
+
+static const unsigned short normal_i2c[] = {
+	0x20, 0x21, 0x22, 0x23, I2C_CLIENT_END
+};
+
+enum chips { nct7363 };
+
+static const struct i2c_device_id nct7363_id[] = {
+	{ "nct7363", nct7363 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, nct7363_id);
+
+static const struct of_device_id nct7363_of_match[] = {
+	{ .compatible = "nuvoton,nct7363", .data = (void *)nct7363 },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, nct7363_of_match);
+
+struct nct7363_data {
+	struct regmap		*regmap;
+	struct mutex		update_lock;
+	bool			valid;
+	unsigned long		last_updated; /* In jiffies */
+
+	u16			fanin_mask;
+	u16			fan[NCT7363_FANIN_COUNT];
+	u16			pwm_mask;
+	u8			pwm[NCT7363_PWM_COUNT];
+};
+
+static struct nct7363_data *nct7363_update_device(struct device *dev)
+{
+	struct nct7363_data *data = dev_get_drvdata(dev);
+	unsigned int hi, lo, regval;
+	int i, ret = 0;
+
+	mutex_lock(&data->update_lock);
+
+	if (!(time_after(jiffies, data->last_updated + REFRESH_INTERVAL)
+	      || !data->valid))
+		goto no_sensor_update;
+
+	for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
+		if (!(data->fanin_mask & BIT_CHECK(i)))
+			continue;
+
+		/*
+		 * High-byte register should be read first to latch
+		 * synchronous low-byte value
+		 */
+		ret = regmap_read(data->regmap,
+				  NCT7363_REG_FANINx_HVAL(i), &hi);
+		if (ret)
+			goto error;
+
+		ret = regmap_read(data->regmap,
+				  NCT7363_REG_FANINx_LVAL(i), &lo);
+		if (ret)
+			goto error;
+
+		data->fan[i] = (hi << 5) | (lo & NCT7363_FANINx_LVAL_MASK);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(data->pwm); i++) {
+		if (!(data->pwm_mask & BIT_CHECK(i)))
+			continue;
+
+		ret = regmap_read(data->regmap,
+				  NCT7363_REG_FSCPxDUTY(i), &regval);
+		if (ret)
+			goto error;
+
+		data->pwm[i] = regval;
+	}
+
+	data->last_updated = jiffies;
+	data->valid = true;
+
+error:
+	if (ret)
+		data = ERR_PTR(ret);
+
+no_sensor_update:
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
+static int nct7363_read_fan(struct device *dev, u32 attr, int channel,
+			    long *val)
+{
+	struct nct7363_data *data = nct7363_update_device(dev);
+	u16 cnt, rpm;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	switch (attr) {
+	case hwmon_fan_input:
+		cnt = data->fan[channel] & NCT7363_FANIN_MASK;
+		rpm = FAN_FROM_REG(cnt);
+		*val = (long)rpm;
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static umode_t nct7363_fan_is_visible(const void *_data, u32 attr, int channel)
+{
+	const struct nct7363_data *data = _data;
+
+	switch (attr) {
+	case hwmon_fan_input:
+		if (data->fanin_mask & BIT_CHECK(channel))
+			return 0444;
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int nct7363_read_pwm(struct device *dev, u32 attr, int channel,
+			    long *val)
+{
+	struct nct7363_data *data = nct7363_update_device(dev);
+	u16 ret;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	switch (attr) {
+	case hwmon_pwm_input:
+		ret = data->pwm[channel];
+		*val = (long)ret;
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int nct7363_write_pwm(struct device *dev, u32 attr, int channel,
+			     long val)
+{
+	struct nct7363_data *data = nct7363_update_device(dev);
+	int ret;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	switch (attr) {
+	case hwmon_pwm_input:
+		if (val < 0 || val > 255)
+			return -EINVAL;
+		mutex_lock(&data->update_lock);
+		ret = regmap_write(data->regmap,
+				   NCT7363_REG_FSCPxDUTY(channel), val);
+		if (ret == 0)
+			data->pwm[channel] = val;
+		mutex_unlock(&data->update_lock);
+		return ret;
+
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static umode_t nct7363_pwm_is_visible(const void *_data, u32 attr, int channel)
+{
+	const struct nct7363_data *data = _data;
+
+	switch (attr) {
+	case hwmon_pwm_input:
+		if (data->pwm_mask & BIT_CHECK(channel))
+			return 0644;
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int nct7363_read(struct device *dev, enum hwmon_sensor_types type,
+			u32 attr, int channel, long *val)
+{
+	switch (type) {
+	case hwmon_fan:
+		return nct7363_read_fan(dev, attr, channel, val);
+	case hwmon_pwm:
+		return nct7363_read_pwm(dev, attr, channel, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int nct7363_write(struct device *dev, enum hwmon_sensor_types type,
+			 u32 attr, int channel, long val)
+{
+	switch (type) {
+	case hwmon_pwm:
+		return nct7363_write_pwm(dev, attr, channel, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static umode_t nct7363_is_visible(const void *data,
+				  enum hwmon_sensor_types type,
+				  u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_fan:
+		return nct7363_fan_is_visible(data, attr, channel);
+	case hwmon_pwm:
+		return nct7363_pwm_is_visible(data, attr, channel);
+	default:
+		return 0;
+	}
+}
+
+static const struct hwmon_channel_info *nct7363_info[] = {
+	HWMON_CHANNEL_INFO(fan,
+			   HWMON_F_INPUT,
+			   HWMON_F_INPUT,
+			   HWMON_F_INPUT,
+			   HWMON_F_INPUT,
+			   HWMON_F_INPUT,
+			   HWMON_F_INPUT,
+			   HWMON_F_INPUT,
+			   HWMON_F_INPUT,
+			   HWMON_F_INPUT,
+			   HWMON_F_INPUT,
+			   HWMON_F_INPUT,
+			   HWMON_F_INPUT,
+			   HWMON_F_INPUT,
+			   HWMON_F_INPUT,
+			   HWMON_F_INPUT,
+			   HWMON_F_INPUT),
+	HWMON_CHANNEL_INFO(pwm,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT,
+			   HWMON_PWM_INPUT),
+	NULL
+};
+
+static const struct hwmon_ops nct7363_hwmon_ops = {
+	.is_visible = nct7363_is_visible,
+	.read = nct7363_read,
+	.write = nct7363_write,
+};
+
+static const struct hwmon_chip_info nct7363_chip_info = {
+	.ops = &nct7363_hwmon_ops,
+	.info = nct7363_info,
+};
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int nct7363_detect(struct i2c_client *client,
+			  struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	int vendor, chip, device;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	vendor = i2c_smbus_read_byte_data(client, NCT7363_REG_VENDOR_ID);
+	if (vendor != NUVOTON_ID)
+		return -ENODEV;
+
+	chip = i2c_smbus_read_byte_data(client, NCT7363_REG_CHIP_ID);
+	if (chip != CHIP_ID)
+		return -ENODEV;
+
+	device = i2c_smbus_read_byte_data(client, NCT7363_REG_DEVICE_ID);
+	if (device != DEVICE_ID)
+		return -ENODEV;
+
+	strscpy(info->type, "nct7363", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int nct7363_init_chip(struct nct7363_data *data)
+{
+	u8 i, gpio0_3 = 0, gpio4_7 = 0, gpio10_13 = 0, gpio14_17 = 0;
+	int ret;
+
+	for (i = 0; i < NCT7363_PWM_COUNT; i++) {
+		if (i < 4) {
+			if (data->pwm_mask & BIT_CHECK(i))
+				gpio0_3 |= PWM_SEL(i);
+			if (data->fanin_mask & BIT_CHECK(i))
+				gpio10_13 |= FANIN_SEL(i);
+		} else if (i < 8) {
+			if (data->pwm_mask & BIT_CHECK(i))
+				gpio4_7 |= PWM_SEL(i);
+			if (data->fanin_mask & BIT_CHECK(i))
+				gpio14_17 |= FANIN_SEL(i);
+		} else if (i < 12) {
+			if (data->pwm_mask & BIT_CHECK(i))
+				gpio10_13 |= PWM_SEL(i);
+			if (data->fanin_mask & BIT_CHECK(i))
+				gpio0_3 |= FANIN_SEL(i);
+		} else {
+			if (data->pwm_mask & BIT_CHECK(i))
+				gpio14_17 |= PWM_SEL(i);
+			if (data->fanin_mask & BIT_CHECK(i))
+				gpio4_7 |= FANIN_SEL(i);
+		}
+	}
+
+	/* Pin Function Configuration */
+	ret = regmap_write(data->regmap, NCT7363_REG_GPIO_0_3, gpio0_3);
+	if (ret < 0)
+		return ret;
+	ret = regmap_write(data->regmap, NCT7363_REG_GPIO_4_7, gpio4_7);
+	if (ret < 0)
+		return ret;
+	ret = regmap_write(data->regmap, NCT7363_REG_GPIO_10_13, gpio10_13);
+	if (ret < 0)
+		return ret;
+	ret = regmap_write(data->regmap, NCT7363_REG_GPIO_14_17, gpio14_17);
+	if (ret < 0)
+		return ret;
+
+	/* PWM and FANIN Monitoring Enable */
+	ret = regmap_write(data->regmap, NCT7363_REG_PWMEN_0_7,
+			   data->pwm_mask & 0xff);
+	if (ret < 0)
+		return ret;
+	ret = regmap_write(data->regmap, NCT7363_REG_PWMEN_8_15,
+			   (data->pwm_mask >> 8) & 0xff);
+	if (ret < 0)
+		return ret;
+	ret = regmap_write(data->regmap, NCT7363_REG_FANINEN_0_7,
+			   data->fanin_mask & 0xff);
+	if (ret < 0)
+		return ret;
+	ret = regmap_write(data->regmap, NCT7363_REG_FANINEN_8_15,
+			   (data->fanin_mask >> 8) & 0xff);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int nct7363_present_pwm_fanin(struct device *dev,
+				     struct device_node *child,
+				     struct nct7363_data *data)
+{
+	struct of_phandle_args args;
+	int ret, fanin_cnt;
+	u8 *fanin_ch;
+	u8 ch, index;
+
+	ret = of_parse_phandle_with_args(child, "pwms", "#pwm-cells",
+					 0, &args);
+	if (ret)
+		return ret;
+
+	data->pwm_mask |= BIT(args.args[0]);
+
+	fanin_cnt = of_property_count_u8_elems(child, "tach-ch");
+	if (fanin_cnt < 1)
+		return -EINVAL;
+
+	fanin_ch = devm_kcalloc(dev, fanin_cnt, sizeof(*fanin_ch), GFP_KERNEL);
+	if (!fanin_ch)
+		return -ENOMEM;
+
+	ret = of_property_read_u8_array(child, "tach-ch", fanin_ch, fanin_cnt);
+	if (ret)
+		return ret;
+
+	for (ch = 0; ch < fanin_cnt; ch++) {
+		index = fanin_ch[ch];
+		data->fanin_mask |= BIT(index);
+	}
+
+	return 0;
+}
+
+static const struct regmap_config nct7363_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int nct7363_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct device_node *child;
+	struct nct7363_data *data;
+	struct device *hwmon_dev;
+	int ret;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->regmap = devm_regmap_init_i2c(client, &nct7363_regmap_config);
+	if (IS_ERR(data->regmap))
+		return PTR_ERR(data->regmap);
+
+	mutex_init(&data->update_lock);
+
+	for_each_child_of_node(dev->of_node, child) {
+		ret = nct7363_present_pwm_fanin(dev, child, data);
+		if (ret) {
+			of_node_put(child);
+			return ret;
+		}
+	}
+
+	/* Initialize the chip */
+	ret = nct7363_init_chip(data);
+	if (ret)
+		return ret;
+
+	hwmon_dev =
+		devm_hwmon_device_register_with_info(dev, client->name, data,
+						     &nct7363_chip_info, NULL);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static struct i2c_driver nct7363_driver = {
+	.class = I2C_CLASS_HWMON,
+	.driver = {
+		.name = "nct7363",
+		.of_match_table = nct7363_of_match,
+	},
+	.probe = nct7363_probe,
+	.id_table = nct7363_id,
+	.detect = nct7363_detect,
+	.address_list = normal_i2c,
+};
+
+module_i2c_driver(nct7363_driver);
+
+MODULE_AUTHOR("CW Ho <cwho@xxxxxxxxxxx>");
+MODULE_AUTHOR("Ban Feng <kcfeng0@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("NCT7363 Hardware Monitoring Driver");
+MODULE_LICENSE("GPL");
-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux