On 15/12/2023 14:55, efectn@xxxxxxxx wrote:
> From: Muhammed Efe Cetin <efectn@xxxxxxxxxxxxxx>
>
> NanoPi R6C is mostly same as R6S variant. It has M2 port instead of a
> NIC port and different led labeling.
>
> Signed-off-by: Muhammed Efe Cetin <efectn@xxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/rockchip/Makefile | 3 ++-
> .../arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts | 14 ++++++++++++++
> 2 files changed, 16 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
>
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index ed2583dcd..261505081 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -114,4 +114,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb
> -dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb
> \ No newline at end of file
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
> \ No newline at end of file
Still warnings...
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
> new file mode 100644
> index 000000000..8031098c3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +
> +#include "rk3588s-nanopi-r6s.dts"
> +
> +/ {
> + model = "FriendlyElec NanoPi R6C";
> + compatible = "friendlyelec,nanopi-r6c", "rockchip,rk3588s";
It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).
Best regards,
Krzysztof
