Elad Nachman <enachman@xxxxxxxxxxx> writes: > From: Elad Nachman <enachman@xxxxxxxxxxx> > > Add support for CN9130 and CN9131 COM Express Type 7 CPU > module boards by Marvell. > Add device tree bindings for this board. > Define these COM Express CPU modules as dtsi, and > provide a dtsi file for a carrier board (Marvell AC5X RD > COM Express type 7 carrier board). > This Carrier board only utilizes the PCIe link, hence no > special device / driver support is provided by this dtsi file. > Finally, add dts file for the combined carrier and CPU module. > > v8: > 1) swap enum for const in dt bindings > > v7: > 1) update MAINTAINERS file to contain all marvell arm64 > dts file in one line, covering all files > 2) Add Documentation to carrier dtsi and combined carrier > and CPU module dts, explaining the configuration and > modes of operations of the carrier and the combined > system. > > v6: > 1) Add cn9130 COM Express system > > 2) Drop with from compatibility name of COM Express system > > 3) Fix indentation issues of dt bindings > > v5: > > 1) List only carrier compatibility on carrier dtsi > > 2) Fix dt_bindings_check warnings using latest yamllint/dtschema > > 3) Fix subject lines to remove unnecessary wordings. > > 4) Remove dt bindings for standalone CPU modules > > 5) Move CN913x dt bindings to A7K dt bindings file > > 6) Fix dtbs_check warnings for dtb and bindings, > using latest yamllint/dtschema. > > 7) Move memory definition to main dts file, as memory > is socket based. > > v4: > 1) reorder patches - dt bindings before dts/dtsi files > > 2) correct description in dt bindings > > 3) separate dt bindings for CPU module, carrier and combination > > 4) make carrier board dts into dtsi, make dts for combination of > carrier and CPU module > > 5) correct compatibility strings and file names to use dashes > instead of underscores > > v3: > 1) Remove acronym which creates warnings for checkpatch.pl > > 2) Correct compatibility string for ac5x rd board > > 3) Add above compatibility string to dt bindings > > 4) update MAINTAINERS file with ac5 series dts files > > 5) remove memory property from carrier dts > > 6) add comment explaining that OOB RGMII ethernet port > connector and PHY are both on CPU module > > v2: > 1) add compatibility string for the board > > 2) remove unneeded hard-coded PHY LED blinking mode initialization > > 3) Split the CPU portion of the carrier board to > dtsi files, and define a dts file for the AC5X RD > carrier board. > > Elad Nachman (3): > MAINTAINERS: add ac5 to list of maintained Marvell dts files > dt-bindings: arm64: add Marvell COM Express boards > arm64: dts: cn913x: add device trees for COM Express boards Applied on mvebu/dt64 Thanks, Gregory > > .../bindings/arm/marvell/armada-7k-8k.yaml | 22 ++++ > MAINTAINERS | 3 +- > arch/arm64/boot/dts/marvell/Makefile | 1 + > .../dts/marvell/ac5x-rd-carrier-cn9131.dts | 44 +++++++ > .../boot/dts/marvell/ac5x-rd-carrier.dtsi | 34 ++++++ > .../dts/marvell/cn9130-db-comexpress.dtsi | 96 ++++++++++++++++ > .../dts/marvell/cn9131-db-comexpress.dtsi | 108 ++++++++++++++++++ > 7 files changed, 306 insertions(+), 2 deletions(-) > create mode 100644 arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts > create mode 100644 arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi > create mode 100644 arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi > create mode 100644 arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi > > -- > 2.25.1 > -- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com
