On 12/14/23 12:44, AngeloGioacchino Del Regno wrote: > Il 13/12/23 13:20, Eugen Hristev ha scritto: >> From: Kyrie Wu <kyrie.wu@xxxxxxxxxxxx> >> >> Add video encoder node. >> >> Signed-off-by: Kyrie Wu <kyrie.wu@xxxxxxxxxxxx> >> Signed-off-by: Allen-KH Cheng <allen-kh.cheng@xxxxxxxxxxxx> >> Reviewed-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx> >> [eugen.hristev@xxxxxxxxxxxxx: minor cleanup] >> Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx> >> --- >> arch/arm64/boot/dts/mediatek/mt8186.dtsi | 24 ++++++++++++++++++++++++ >> 1 file changed, 24 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi >> index 66ead3f23336..8535ff2b44e9 100644 >> --- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi >> +++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi >> @@ -1993,6 +1993,30 @@ larb7: smi@17010000 { >> power-domains = <&spm MT8186_POWER_DOMAIN_VENC>; >> }; >> >> + venc: venc@17020000 { >> + compatible = "mediatek,mt8183-vcodec-enc"; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + reg = <0 0x17020000 0 0x2000>; >> + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>; >> + iommus = <&iommu_mm IOMMU_PORT_L7_VENC_RCPU>, >> + <&iommu_mm IOMMU_PORT_L7_VENC_REC>, >> + <&iommu_mm IOMMU_PORT_L7_VENC_BSDMA>, >> + <&iommu_mm IOMMU_PORT_L7_VENC_SV_COMV>, >> + <&iommu_mm IOMMU_PORT_L7_VENC_RD_COMV>, >> + <&iommu_mm IOMMU_PORT_L7_VENC_CUR_LUMA>, >> + <&iommu_mm IOMMU_PORT_L7_VENC_CUR_CHROMA>, >> + <&iommu_mm IOMMU_PORT_L7_VENC_REF_LUMA>, >> + <&iommu_mm IOMMU_PORT_L7_VENC_REF_CHROMA>; >> + dma-ranges = <0x1 0x0 0x1 0x0 0x1 0x0>; >> + mediatek,scp = <&scp>; >> + clocks = <&vencsys CLK_VENC_CKE1_VENC>; >> + clock-names = "MT_CG_VENC"; > > clock-names = "venc"; (please no underscores and please lower case) The clock name must be `venc_sel` (*with* underscores) and it's ABI as defined in Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml so I will it change to that. > >> + assigned-clocks = <&topckgen CLK_TOP_VENC>; >> + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D3>; >> + power-domains = <&spm MT8186_POWER_DOMAIN_VENC>; >> + }; > > > ....also: > > The following order of properties in device nodes is preferred: > > 1. "compatible" > 2. "reg" > 3. "ranges" > 4. Standard/common properties (defined by common bindings, e.g. without > vendor-prefixes) > 5. Vendor-specific properties > 6. "status" (if applicable) > 7. Child nodes, where each node is preceded with a blank line > > Documentation/devicetree/bindings/dts-coding-style.rst > > Please reorder as per the DTS coding style document, and also please rename the > venc node to use a generic name, such as "video-encoder@xxxx" > > Cheers, > Angelo > _______________________________________________ > Kernel mailing list -- kernel@xxxxxxxxxxxxxxxxxxxxx > To unsubscribe send an email to kernel-leave@xxxxxxxxxxxxxxxxxxxxx