Re: [PATCH 4/4] arm64: dts: mediatek: mt8186: Add venc node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Il 13/12/23 13:20, Eugen Hristev ha scritto:
From: Kyrie Wu <kyrie.wu@xxxxxxxxxxxx>

Add video encoder node.

Signed-off-by: Kyrie Wu <kyrie.wu@xxxxxxxxxxxx>
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@xxxxxxxxxxxx>
Reviewed-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
[eugen.hristev@xxxxxxxxxxxxx: minor cleanup]
Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
---
  arch/arm64/boot/dts/mediatek/mt8186.dtsi | 24 ++++++++++++++++++++++++
  1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index 66ead3f23336..8535ff2b44e9 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -1993,6 +1993,30 @@ larb7: smi@17010000 {
  			power-domains = <&spm MT8186_POWER_DOMAIN_VENC>;
  		};
+ venc: venc@17020000 {
+			compatible = "mediatek,mt8183-vcodec-enc";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			reg = <0 0x17020000 0 0x2000>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu_mm IOMMU_PORT_L7_VENC_RCPU>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_REC>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_BSDMA>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_SV_COMV>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_RD_COMV>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_CUR_LUMA>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_CUR_CHROMA>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_REF_LUMA>,
+				 <&iommu_mm IOMMU_PORT_L7_VENC_REF_CHROMA>;
+			dma-ranges = <0x1 0x0 0x1 0x0 0x1 0x0>;
+			mediatek,scp = <&scp>;
+			clocks = <&vencsys CLK_VENC_CKE1_VENC>;
+			clock-names = "MT_CG_VENC";

clock-names = "venc"; (please no underscores and please lower case)

+			assigned-clocks = <&topckgen CLK_TOP_VENC>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D3>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_VENC>;
+		};


....also:

The following order of properties in device nodes is preferred:

1. "compatible"
2. "reg"
3. "ranges"
4. Standard/common properties (defined by common bindings, e.g. without
   vendor-prefixes)
5. Vendor-specific properties
6. "status" (if applicable)
7. Child nodes, where each node is preceded with a blank line

Documentation/devicetree/bindings/dts-coding-style.rst

Please reorder as per the DTS coding style document, and also please rename the
venc node to use a generic name, such as "video-encoder@xxxx"

Cheers,
Angelo




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux