On Thu, Dec 14, 2023 at 12:12:08PM +0100, Alex Bee wrote:
> Hi Maxime
>
> Am 14.12.23 um 08:56 schrieb Maxime Ripard:
> > Hi Alex,
> >
> > Thanks for working on this!
> >
> > On Wed, Dec 13, 2023 at 08:51:18PM +0100, Alex Bee wrote:
> > > The display controller will always give full range RGB regardless of the
> > > mode set, but HDMI requires certain modes to be transmitted in limited
> > > range RGB. This is especially required for HDMI sinks which do not support
> > > non-standard quantization ranges.
> > >
> > > This enables color space conversion for those modes and sets the
> > > quantization range accordingly in the AVI infoframe.
> > >
> > > Fixes: 412d4ae6b7a5 ("drm/rockchip: hdmi: add Innosilicon HDMI support")
> > > Signed-off-by: Alex Bee <knaerzche@xxxxxxxxx>
> > > ---
> > > drivers/gpu/drm/rockchip/inno_hdmi.c | 40 ++++++++++++++++++++++------
> > > 1 file changed, 32 insertions(+), 8 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
> > > index 345253e033c5..32626a75723c 100644
> > > --- a/drivers/gpu/drm/rockchip/inno_hdmi.c
> > > +++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
> > > @@ -33,6 +33,7 @@ struct hdmi_data_info {
> > > unsigned int enc_in_format;
> > > unsigned int enc_out_format;
> > > unsigned int colorimetry;
> > > + bool rgb_limited_range;
> > > };
> > > struct inno_hdmi_i2c {
> > > @@ -308,6 +309,18 @@ static int inno_hdmi_config_video_avi(struct inno_hdmi *hdmi,
> > > else
> > > frame.avi.colorspace = HDMI_COLORSPACE_RGB;
> > > + if (hdmi->hdmi_data.enc_out_format == HDMI_COLORSPACE_RGB) {
> > > + drm_hdmi_avi_infoframe_quant_range(&frame.avi,
> > > + &hdmi->connector, mode,
> > > + hdmi->hdmi_data.rgb_limited_range ?
> > > + HDMI_QUANTIZATION_RANGE_LIMITED :
> > > + HDMI_QUANTIZATION_RANGE_FULL);
> > > + } else {
> > > + frame.avi.quantization_range = HDMI_QUANTIZATION_RANGE_DEFAULT;
> > > + frame.avi.ycc_quantization_range =
> > > + HDMI_YCC_QUANTIZATION_RANGE_LIMITED;
> > > + }
> > > +
> > > return inno_hdmi_upload_frame(hdmi, rc, &frame, INFOFRAME_AVI, 0, 0, 0);
> > > }
> > > @@ -334,14 +347,22 @@ static int inno_hdmi_config_video_csc(struct inno_hdmi *hdmi)
> > > if (data->enc_in_format == data->enc_out_format) {
> > > if ((data->enc_in_format == HDMI_COLORSPACE_RGB) ||
> > > (data->enc_in_format >= HDMI_COLORSPACE_YUV444)) {
> > > - value = v_SOF_DISABLE | v_COLOR_DEPTH_NOT_INDICATED(1);
> > > - hdmi_writeb(hdmi, HDMI_VIDEO_CONTRL3, value);
> > > -
> > > - hdmi_modb(hdmi, HDMI_VIDEO_CONTRL,
> > > - m_VIDEO_AUTO_CSC | m_VIDEO_C0_C2_SWAP,
> > > - v_VIDEO_AUTO_CSC(AUTO_CSC_DISABLE) |
> > > - v_VIDEO_C0_C2_SWAP(C0_C2_CHANGE_DISABLE));
> > > - return 0;
> > > + if (data->enc_in_format == HDMI_COLORSPACE_RGB &&
> > > + data->enc_out_format == HDMI_COLORSPACE_RGB &&
> > > + hdmi->hdmi_data.rgb_limited_range) {
> > > + csc_mode = CSC_RGB_0_255_TO_RGB_16_235_8BIT;
> > > + auto_csc = AUTO_CSC_DISABLE;
> > > + c0_c2_change = C0_C2_CHANGE_DISABLE;
> > > + csc_enable = v_CSC_ENABLE;
> > > + } else {
> > > + value = v_SOF_DISABLE | v_COLOR_DEPTH_NOT_INDICATED(1);
> > > + hdmi_writeb(hdmi, HDMI_VIDEO_CONTRL3, value);
> > > + hdmi_modb(hdmi, HDMI_VIDEO_CONTRL,
> > > + m_VIDEO_AUTO_CSC | m_VIDEO_C0_C2_SWAP,
> > > + v_VIDEO_AUTO_CSC(AUTO_CSC_DISABLE) |
> > > + v_VIDEO_C0_C2_SWAP(C0_C2_CHANGE_DISABLE));
> > > + return 0;
> > > + }
> > > }
> > > }
> > > @@ -458,6 +479,9 @@ static int inno_hdmi_setup(struct inno_hdmi *hdmi,
> > > else
> > > hdmi->hdmi_data.colorimetry = HDMI_COLORIMETRY_ITU_709;
> > > + hdmi->hdmi_data.rgb_limited_range =
> > > + drm_default_rgb_quant_range(mode) == HDMI_QUANTIZATION_RANGE_LIMITED;
> > > +
> > This patch conflicts heavily with my inno_hdmi patches here (patches 22 to 38):
> > https://lore.kernel.org/dri-devel/20231207-kms-hdmi-connector-state-v5-0-6538e19d634d@xxxxxxxxxx/
>
> I'm aware of that and I mentioned it in the cover letter.
Sorry, I missed that part.
> Your series is not merged yet and it didn't get much feedback so far.
> What is the status there?
It didn't have much reviews, but I'll hope to change that. For the
patches 22 to 38 though, it doesn't really matter. Those changes are
self-contained and can be applied as is outside of the series.
> Especially because you are removing things from inno-hdmi driver (which
> aren't really required to remove there) which will I have to reintroduce.
I'm not entirely sure which part I remove that are actually going to be
used here.
> > I would appreciate if you could test and merge them into your series.
> >
> > In particular, there's no need to store the range here: enc_out_format
>
> rgb_limited_range is currently not only used for csc, but also for for
> infoframe creation. So it makes sense to have this stored to avoid calling
> drm_default_rgb_quant_range twice.
You're right, I missed one. Still, it shouldn't be stored in the
hdmi_data_info structure, it's tied to the mode, and the mode is part of
the state, so it's not a property to a given device, but it's tied to
the connector state.
So if you want to do so, you should really create a custom state
structure and store the range there, just like vc4 is doing for example.
Maxime
Attachment:
signature.asc
Description: PGP signature
