On Wednesday, November 22, 2023 3:14:22 PM CET Paul Kocialkowski wrote:
> The V3s (and related platforms) come with an instance of the A31 ISP.
> Even though it is very close to the A31 ISP, it is not exactly
> register-compatible and a dedicated compatible only is used as a
> result.
>
> Just like most other blocks of the camera pipeline, the ISP uses
> the common CSI bus, module and ram clock as well as reset.
>
> A port connection to the ISP is added to CSI0 for convenience since
> CSI0 serves for MIPI CSI-2 interface support, which is likely to
> receive raw data that will need to be processed by the ISP to produce
> a final image.
>
> The interconnects property is used to inherit the proper DMA offset.
>
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
> ---
> arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi | 35 ++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
> index d57612023aa4..1a1dcd36cba4 100644
> --- a/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
> +++ b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
> @@ -645,6 +645,14 @@ csi0_in_mipi_csi2: endpoint {
> remote-endpoint = <&mipi_csi2_out_csi0>;
> };
> };
> +
> + port@2 {
> + reg = <2>;
> +
> + csi0_out_isp: endpoint {
> + remote-endpoint = <&isp_in_csi0>;
> + };
> + };
> };
> };
>
> @@ -703,5 +711,32 @@ csi1: camera@1cb4000 {
> resets = <&ccu RST_BUS_CSI>;
> status = "disabled";
> };
> +
> + isp: isp@1cb8000 {
> + compatible = "allwinner,sun8i-v3s-isp";
> + reg = <0x01cb8000 0x1000>;
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_CSI>,
> + <&ccu CLK_CSI1_SCLK>,
> + <&ccu CLK_DRAM_CSI>;
> + clock-names = "bus", "mod", "ram";
> + resets = <&ccu RST_BUS_CSI>;
> + interconnects = <&mbus 5>;
> + interconnect-names = "dma-mem";
Same as in previous patch, interconnects properties are not described in
bindings, please update.
Best regards,
Jernej
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + isp_in_csi0: endpoint {
> + remote-endpoint = <&csi0_out_isp>;
> + };
> + };
> + };
> + };
> };
> };
>
