From: Manorit Chawdhry <m-chawdhry@xxxxxx> Add additional reg properties for UDMA and RingAcc nodes which are mostly used by bootloader components before Device Manager firmware services are available, in order to setup DMA transfers. Signed-off-by: Manorit Chawdhry <m-chawdhry@xxxxxx> Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx> --- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 8 ++++++-- arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 8 ++++++-- 2 files changed, 12 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index cc59fc648b56..fcea54465636 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -792,8 +792,12 @@ main_udmap: dma-controller@31150000 { compatible = "ti,am654-navss-main-udmap"; reg = <0x0 0x31150000 0x0 0x100>, <0x0 0x34000000 0x0 0x100000>, - <0x0 0x35000000 0x0 0x100000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x35000000 0x0 0x100000>, + <0x0 0x30b00000 0x0 0x10000>, + <0x0 0x30c00000 0x0 0x10000>, + <0x0 0x30d00000 0x0 0x8000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&inta_main_udmass>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index edd5cfbec40e..ecd7356f3315 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -214,8 +214,12 @@ mcu_udmap: dma-controller@285c0000 { compatible = "ti,am654-navss-mcu-udmap"; reg = <0x0 0x285c0000 0x0 0x100>, <0x0 0x2a800000 0x0 0x40000>, - <0x0 0x2aa00000 0x0 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x2aa00000 0x0 0x40000>, + <0x0 0x284a0000 0x0 0x4000>, + <0x0 0x284c0000 0x0 0x4000>, + <0x0 0x28400000 0x0 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&inta_main_udmass>; #dma-cells = <1>; -- 2.43.0