Re: [PATCH 1/2] dt-bindings: iio: spi-dac: Add driver for SPI shift register DACs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 13 Dec 2023 10:09:09 +0100, Mike Looijmans wrote:
> Add a driver for generic serial shift register DACs like TI DAC714.
> 
> Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
> 
> ---
> 
>  .../devicetree/bindings/iio/dac/spidac.yaml   | 69 +++++++++++++++++++
>  1 file changed, 69 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/dac/spidac.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/iio/dac/spidac.yaml:44:8: [warning] wrong indentation: expected 6 but found 7 (indentation)

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/iio/dac/spidac.example.dtb: /example-0/spi/dac@1: failed to match any schema with compatible: ['spidac']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231213090910.25410-1-mike.looijmans@xxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux