Re:Re: [v3 5/6] drm/vs: Add hdmi driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Keith:

在 2023-12-08 11:00:31,"Keith Zhao" <keith.zhao@xxxxxxxxxxxxxxxx> 写道:
>
>
>On 2023/12/8 8:37, Andy Yan wrote:
>> Hi Keth:
>> 
>> 
>> 
>> 
>> 
>> 
>> 在 2023-12-07 18:48:13,"Keith Zhao" <keith.zhao@xxxxxxxxxxxxxxxx> 写道:
>>>
>>>
>>>On 2023/12/7 17:02, Andy Yan wrote:
>>>> 
>>>> 
>>>> 
>>>> 
>>>> Hi Keith:
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> At 2023-12-06 22:11:33, "Keith Zhao" <keith.zhao@xxxxxxxxxxxxxxxx> wrote:
>>>>>
>>>>>
>>>>>On 2023/12/6 20:56, Maxime Ripard wrote:
>>>>>> On Wed, Dec 06, 2023 at 08:02:55PM +0800, Keith Zhao wrote:
>>>>>>> >> +static const struct of_device_id starfive_hdmi_dt_ids[] = {
>>>>>>> >> +	{ .compatible = "starfive,jh7110-inno-hdmi",},
>>>>>>> > 
>>>>>>> > So it's inno hdmi, just like Rockchip then?
>>>>>>> > 
>>>>>>> > This should be a common driver.
>>>>>>>
>>>>>>> Rockchip has a inno hdmi IP. and Starfive has a inno hdmi IP.
>>>>>>> but the harewawre difference of them is big , it is not easy to use the common driver
>>>>>>> maybe i need the inno hdmi version here to make a distinction
>>>>>> 
>>>>>> I just had a look at the rockchip header file: all the registers but the
>>>>>> STARFIVE_* ones are identical.
>>>>>> 
>>>>>> There's no need to have two identical drivers then, please use the
>>>>>> rockchip driver instead.
>>>>>> 
>>>>>> Maxime
>>>>>
>>>>>ok, have a simple test , edid can get . i will continue 
>>>> 
>>>> Maybe you can take drivers/gpu/drm/bridge/synopsys/dw-hdmi as a reference, this
>>>> is also a hdmi ip used by rockchip/meson/sunxi/jz/imx。
>>>> We finally make it share one driver。
>>>>>
>>>hi Andy:
>>>
>>>dw_hdmi seems a good choice , it can handle inno hdmi hardware by define its dw_hdmi_plat_data.
>>>does it means i can write own driver files such as(dw_hdmi-starfive.c) based on dw_hdmi instead of add plat_data in inno_hdmi.c
>>>
>> 
>> I think the process maybe like this:
>> 
>> 1. split the inno_hdmi.c under rockchip to  inno_hdmi.c(the common part), inno_hdmi-rockchip.c(the soc specific part)
>> 2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
>> 3. add startfive specific part, inno_hdmi-startfive.c
>> 
>> bellow git log from kernel three show how we convert  dw_hdmi to a common driver: 
>> 
>> 
>> 
>> 12b9f204e804 drm: bridge/dw_hdmi: add rockchip rk3288 support
>> 74af9e4d03b8 dt-bindings: Add documentation for rockchip dw hdmi
>> d346c14eeea9 drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare
>> a4d3b8b050d5 drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done
>> 632d035bace2 drm: bridge/dw_hdmi: add mode_valid support
>> 0cd9d1428322 drm: bridge/dw_hdmi: add support for multi-byte register width access
>> cd152393967e dt-bindings: add document for dw_hdmi
>> b21f4b658df8 drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi
>> aaa757a092c2 drm: imx: imx-hdmi: split phy configuration to platform driver
>> 3d1b35a3d9f3 drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode
>> c2c3848851a7 drm: imx: imx-hdmi: return defer if can't get ddc i2c adapter
>> b587833933de drm: imx: imx-hdmi: make checkpatch happy
>> 
>hi Andy:
>I got you means, 
>as I don't have a rockchip board on hand , to split the inno_hdmi.c can not be tested.
>
>how adout this idea:
>1、split the starfive_hdmi.c under verisilicion to  inno_hdmi.c(the common part), inno_hdmi-starfive.c(the soc specific part)
>2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
>3. In the future, inno hdmi.c under rockchip will reuse the public driver.

I am not sure if drm maintainers are happy with this。

To be honest, I also don't have a  i.mx board when I start convert dw_hdmi to a common driver,
some respectable people from the community help test and give me many valuable advice, this
is the power of open source。

I found a rk3036 based kylin board this week,but it can't  boot yet,I will go on try if
I can boot it this weekend。 I can do the test on rockchip side, if i can make this board work。

>
>> 
>>>Thanks for pointing this out!!!
>>>
>>>>>
>>>>>_______________________________________________
>>>>>linux-riscv mailing list
>>>>>linux-riscv@xxxxxxxxxxxxxxxxxxx
>>>>>http://lists.infradead.org/mailman/listinfo/linux-riscv
>>>
>>>_______________________________________________
>>>linux-riscv mailing list
>>>linux-riscv@xxxxxxxxxxxxxxxxxxx
>>>http://lists.infradead.org/mailman/listinfo/linux-riscv




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux