Re: [PATCH v5 1/2] media: dt-bindings: Add OmniVision OV64A40

[Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>]

Hi Jacopo,

On Wed, Dec 06, 2023 at 04:58:59PM +0100, Jacopo Mondi wrote:
> Add bindings for OmniVision OV64A40.
> 
> Co-developed-by: Lee Jackson <lee.jackson@xxxxxxxxxxx>
> Signed-off-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
> Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> ---
>  .../bindings/media/i2c/ovti,ov64a40.yaml      | 97 +++++++++++++++++++
>  1 file changed, 97 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml
> new file mode 100644
> index 000000000000..e6c9d540a2dd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml
> @@ -0,0 +1,97 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov64a40.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: OmniVision OV64A40 Image Sensor
> +
> +maintainers:
> +  - Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
> +
> +allOf:
> +  - $ref: /schemas/media/video-interface-devices.yaml#
> +
> +properties:
> +  compatible:
> +    const: ovti,ov64a40
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  avdd-supply:
> +    description: Analog voltage supply, 2.8 volts
> +
> +  dvdd-supply:
> +    description: Digital core voltage supply, 1.1 volts
> +
> +  dovdd-supply:
> +    description: Digital I/O voltage supply, 1.8 volts
> +
> +  powerdown-gpios:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/$defs/port-base
> +    additionalProperties: false
> +
> +    properties:
> +      endpoint:
> +        $ref: /schemas/media/video-interfaces.yaml#
> +        additionalProperties: false
> +
> +        properties:
> +          bus-type:
> +            enum:
> +              - 1 # MIPI CSI-2 C-PHY
> +              - 4 # MIPI CSI-2 D-PHY
> +          data-lanes: true
> +          link-frequencies: true
> +          clock-noncontinuous: true
> +          remote-endpoint: true
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - port
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +      #include <dt-bindings/gpio/gpio.h>
> +
> +      i2c {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          camera@36 {
> +              compatible = "ovti,ov64a40";
> +              reg = <0x36>;
> +              clocks = <&camera_clk>;
> +              dovdd-supply = <&vgen4_reg>;
> +              avdd-supply = <&vgen3_reg>;
> +              dvdd-supply = <&vgen2_reg>;
> +              powerdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
> +              reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
> +              rotation = <180>;
> +              orientation = <2>;
> +
> +              port {
> +                  endpoint {
> +                      remote-endpoint = <&mipi_csi2_in>;
> +                      bus-type = <4>;
> +                      data-lanes = <1 2 3 4>;

This is missing link-frequencies.

> +                  };
> +              };
> +          };
> +      };
> +
> +...

-- 
Regards,

Sakari Ailus