Re: [RFC,v14 4/5] arm64: tegra: Add PCIe port node with PCIe WAKE# for C1 controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 07-12-2023 13:29, Manivannan Sadhasivam wrote:
External email: Use caution opening links or attachments


On Thu, Dec 07, 2023 at 12:54:04PM +0530, Manikanta Maddireddy wrote:
On 06-12-2023 21:06, Manivannan Sadhasivam wrote:
External email: Use caution opening links or attachments


On Wed, Feb 08, 2023 at 04:46:44PM +0530, Manikanta Maddireddy wrote:
Add PCIe port node under the PCIe controller-1 device tree node to support
PCIe WAKE# interrupt for WiFi.

Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx>
---

Changes in v14:
New patch in the series to support PCIe WAKE# in NVIDIA Jetson AGX Orin.

   .../dts/nvidia/tegra234-p3737-0000+p3701-0000.dts     | 11 +++++++++++
   1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index 8a9747855d6b..9c89be263141 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -2147,6 +2147,17 @@ pcie@14100000 {

                        phys = <&p2u_hsio_3>;
                        phy-names = "p2u-0";
+
+                     pci@0,0 {
+                             reg = <0x0000 0 0 0 0>;
+                             #address-cells = <3>;
+                             #size-cells = <2>;
+                             ranges;
+
+                             interrupt-parent = <&gpio>;
+                             interrupts = <TEGRA234_MAIN_GPIO(L, 2) IRQ_TYPE_LEVEL_LOW>;
+                             interrupt-names = "wakeup";
WAKE# should be part of the PCIe controller, not device. And the interrupt name
should be "wake".

- Mani
Hi,

Please refer to the discussion in below link, WAKE# is per PCI bridge.
https://patchwork.ozlabs.org/project/linux-pci/patch/20171226020806.32710-2-jeffy.chen@xxxxxxxxxxxxxx/

PCIe Host controller (RC) usually represents host bridge + PCI-PCI bridge. We do
not represent the PCI-PCI bridge in devicetree for any platforms, but only RC as
a whole.

Moreover, PERST# is already defined in RC node. So it becomes confusing if
WAKE# is defined in a child node representing bridge.

So please move WAKE# to RC node.

- Mani

Hi,

We can define PCI-PCI bridge in device tree, refer to below device tree which has 3 ports under a controller,
with PERST#(reset-gpios) defined per port.

https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm64/boot/dts/apple/t8103.dtsi#n749

Also, of_pci_setup_wake_irq() in below patch is parsing "wakeup" from PCI bridge, not from the host bridge.
https://patchwork.ozlabs.org/project/linux-pci/patch/20230208111645.3863534-4-mmaddireddy@xxxxxxxxxx/

If a controller has only one port it has to define a PCI bridge under controller device tree node and
add wakeup interrupt property, refer to below patch from original author.

https://www.spinics.net/lists/linux-pci/msg135569.html

Thanks,
Manikanta

I carried wakeup name defined in previous version, but wake seems to be
sufficient.

Thanks,
Manikanta
+                     };
                };

                pcie@14160000 {
--
2.25.1

--
மணிவண்ணன் சதாசிவம்
--
மணிவண்ணன் சதாசிவம்




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux