On Thu, Dec 07, 2023 at 12:54:04PM +0530, Manikanta Maddireddy wrote:
>
> On 06-12-2023 21:06, Manivannan Sadhasivam wrote:
> > External email: Use caution opening links or attachments
> >
> >
> > On Wed, Feb 08, 2023 at 04:46:44PM +0530, Manikanta Maddireddy wrote:
> > > Add PCIe port node under the PCIe controller-1 device tree node to support
> > > PCIe WAKE# interrupt for WiFi.
> > >
> > > Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx>
> > > ---
> > >
> > > Changes in v14:
> > > New patch in the series to support PCIe WAKE# in NVIDIA Jetson AGX Orin.
> > >
> > > .../dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 11 +++++++++++
> > > 1 file changed, 11 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
> > > index 8a9747855d6b..9c89be263141 100644
> > > --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
> > > +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
> > > @@ -2147,6 +2147,17 @@ pcie@14100000 {
> > >
> > > phys = <&p2u_hsio_3>;
> > > phy-names = "p2u-0";
> > > +
> > > + pci@0,0 {
> > > + reg = <0x0000 0 0 0 0>;
> > > + #address-cells = <3>;
> > > + #size-cells = <2>;
> > > + ranges;
> > > +
> > > + interrupt-parent = <&gpio>;
> > > + interrupts = <TEGRA234_MAIN_GPIO(L, 2) IRQ_TYPE_LEVEL_LOW>;
> > > + interrupt-names = "wakeup";
> > WAKE# should be part of the PCIe controller, not device. And the interrupt name
> > should be "wake".
> >
> > - Mani
> Hi,
>
> Please refer to the discussion in below link, WAKE# is per PCI bridge.
> https://patchwork.ozlabs.org/project/linux-pci/patch/20171226020806.32710-2-jeffy.chen@xxxxxxxxxxxxxx/
>
PCIe Host controller (RC) usually represents host bridge + PCI-PCI bridge. We do
not represent the PCI-PCI bridge in devicetree for any platforms, but only RC as
a whole.
Moreover, PERST# is already defined in RC node. So it becomes confusing if
WAKE# is defined in a child node representing bridge.
So please move WAKE# to RC node.
- Mani
> I carried wakeup name defined in previous version, but wake seems to be
> sufficient.
>
> Thanks,
> Manikanta
> >
> > > + };
> > > };
> > >
> > > pcie@14160000 {
> > > --
> > > 2.25.1
> > >
> > --
> > மணிவண்ணன் சதாசிவம்
--
மணிவண்ணன் சதாசிவம்
