On Wed, 06 Dec 2023 01:44:38 +0000, Daniel Golle wrote: > Add driver for USXGMII PCS found in the MediaTek MT7988 SoC and supporting > USXGMII, 10GBase-R and 5GBase-R interface modes. In order to support > Cisco SGMII, 1000Base-X and 2500Base-X via the also present LynxI PCS > create a wrapped PCS taking care of the components shared between the > new USXGMII PCS and the legacy LynxI PCS. > > Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx> > --- > .../bindings/net/pcs/mediatek,usxgmii.yaml | 46 +- > MAINTAINERS | 2 + > drivers/net/pcs/Kconfig | 11 + > drivers/net/pcs/Makefile | 1 + > drivers/net/pcs/pcs-mtk-usxgmii.c | 413 ++++++++++++++++++ > include/linux/pcs/pcs-mtk-usxgmii.h | 26 ++ > 6 files changed, 456 insertions(+), 43 deletions(-) > create mode 100644 drivers/net/pcs/pcs-mtk-usxgmii.c > create mode 100644 include/linux/pcs/pcs-mtk-usxgmii.h > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/3cd8af5e44554c2db2d7898494ee813967206bd9.1701826319.git.daniel@xxxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
