Hi, kernel test robot noticed the following build warnings: [auto build test WARNING on linus/master] [also build test WARNING on v6.7-rc4 next-20231205] [cannot apply to groeck-staging/hwmon-next] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/baneric926-gmail-com/dt-bindings-hwmon-Add-nct736x-bindings/20231204-135942 base: linus/master patch link: https://lore.kernel.org/r/20231204055650.788388-3-kcfeng0%40nuvoton.com patch subject: [PATCH v1 2/2] hwmon: Driver for Nuvoton NCT736X config: um-randconfig-001-20231205 (https://download.01.org/0day-ci/archive/20231205/202312052243.AbRqbNyT-lkp@xxxxxxxxx/config) compiler: gcc-11 (Debian 11.3.0-12) 11.3.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231205/202312052243.AbRqbNyT-lkp@xxxxxxxxx/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@xxxxxxxxx> | Closes: https://lore.kernel.org/oe-kbuild-all/202312052243.AbRqbNyT-lkp@xxxxxxxxx/ All warnings (new ones prefixed by >>): drivers/hwmon/nct736x.c: In function 'nct736x_init_chip.constprop': >> drivers/hwmon/nct736x.c:367:15: warning: 'gpio0_3' is used uninitialized [-Wuninitialized] 367 | ret = nct736x_write_reg(client, NCT736X_REG_GPIO_0_3, gpio0_3); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ vim +/gpio0_3 +367 drivers/hwmon/nct736x.c 334 335 static int nct736x_init_chip(struct i2c_client *client, 336 u32 pwm_mask, u32 fanin_mask, u32 wdt_cfg) 337 { 338 const struct i2c_device_id *id = i2c_match_id(nct736x_id, client); 339 u8 i, gpio0_3, gpio4_7, gpio10_13, gpio14_17; 340 int ret; 341 342 for (i = 0; i < NCT736X_PWM_COUNT; i++) { 343 if (i < 4) { 344 if (pwm_mask & BIT_CHECK(i)) 345 gpio0_3 |= PWM_SEL(i); 346 if (fanin_mask & BIT_CHECK(i)) 347 gpio10_13 |= FANIN_SEL(i); 348 } else if (i < 8) { 349 if (pwm_mask & BIT_CHECK(i)) 350 gpio4_7 |= PWM_SEL(i); 351 if (fanin_mask & BIT_CHECK(i)) 352 gpio14_17 |= FANIN_SEL(i); 353 } else if (i < 12) { 354 if (pwm_mask & BIT_CHECK(i)) 355 gpio10_13 |= PWM_SEL(i); 356 if (fanin_mask & BIT_CHECK(i)) 357 gpio0_3 |= FANIN_SEL(i); 358 } else { 359 if (pwm_mask & BIT_CHECK(i)) 360 gpio14_17 |= PWM_SEL(i); 361 if (fanin_mask & BIT_CHECK(i)) 362 gpio4_7 |= FANIN_SEL(i); 363 } 364 } 365 366 /* Pin Function Configuration */ > 367 ret = nct736x_write_reg(client, NCT736X_REG_GPIO_0_3, gpio0_3); 368 if (ret < 0) 369 return ret; 370 ret = nct736x_write_reg(client, NCT736X_REG_GPIO_4_7, gpio4_7); 371 if (ret < 0) 372 return ret; 373 ret = nct736x_write_reg(client, NCT736X_REG_GPIO_10_13, gpio10_13); 374 if (ret < 0) 375 return ret; 376 ret = nct736x_write_reg(client, NCT736X_REG_GPIO_14_17, gpio14_17); 377 if (ret < 0) 378 return ret; 379 380 /* PWM and FANIN Monitoring Enable */ 381 ret = nct736x_write_reg(client, NCT736X_REG_PWMEN_0_7, 382 pwm_mask & 0xff); 383 if (ret < 0) 384 return ret; 385 ret = nct736x_write_reg(client, 386 NCT736X_REG_PWMEN_8_15, (pwm_mask >> 8) & 0xff); 387 if (ret < 0) 388 return ret; 389 ret = nct736x_write_reg(client, NCT736X_REG_FANINEN_0_7, 390 fanin_mask & 0xff); 391 if (ret < 0) 392 return ret; 393 ret = nct736x_write_reg(client, NCT736X_REG_FANINEN_8_15, 394 (fanin_mask >> 8) & 0xff); 395 if (ret < 0) 396 return ret; 397 398 /* Watchdog Timer Configuration */ 399 if (wdt_cfg != 0xff && id->driver_data == nct7363) { 400 ret = nct736x_write_reg(client, NCT7363_REG_WDT, wdt_cfg); 401 if (ret < 0) 402 return ret; 403 } 404 405 return 0; 406 } 407 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
