It's possible to have the XPCS device accessible over a dedicated
management interface which makes the XPCS device available over the MMIO
space. In that case the management interface will be registered as a
separate MDIO bus and the DW xGMAC device will be equipped with the
"pcs-handle" property pointing to the XPCS device instead of
auto-detecting it on the internal MDIO bus. In such configurations the SMA
interface (embedded into the DW xGMAC MDIO interface) might be absent.
Thus passing the MII bus interface handler to the stmmac_xpcs_setup()
method won't let us reach the externally supplied XPCS device especially
if the SMA bus isn't configured. Let's fix it by converting the
stmmac_xpcs_setup(struct mii_bus *bus) prototype to
stmmac_xpcs_setup(struct net_device *ndev).
Note this is a preparation patch before adding the support of the XPCS
devices specified via the "pcs-handle" property.
Signed-off-by: Serge Semin <fancer.lancer@xxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 5 ++---
3 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index cd7a9768de5f..d8a1c84880c5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -343,7 +343,7 @@ enum stmmac_state {
int stmmac_mdio_unregister(struct net_device *ndev);
int stmmac_mdio_register(struct net_device *ndev);
int stmmac_mdio_reset(struct mii_bus *mii);
-int stmmac_xpcs_setup(struct mii_bus *mii);
+int stmmac_xpcs_setup(struct net_device *ndev);
void stmmac_set_ethtool_ops(struct net_device *netdev);
int stmmac_init_tstamp_counter(struct stmmac_priv *priv, u32 systime_flags);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 3e50fd53a617..c3641db00f96 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7605,7 +7605,7 @@ int stmmac_dvr_probe(struct device *device,
priv->plat->speed_mode_2500(ndev, priv->plat->bsp_priv);
if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data->has_xpcs) {
- ret = stmmac_xpcs_setup(priv->mii);
+ ret = stmmac_xpcs_setup(ndev);
if (ret)
goto error_xpcs_setup;
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index aa75e4f1e212..e6133510e28d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -495,9 +495,8 @@ int stmmac_mdio_reset(struct mii_bus *bus)
return 0;
}
-int stmmac_xpcs_setup(struct mii_bus *bus)
+int stmmac_xpcs_setup(struct net_device *ndev)
{
- struct net_device *ndev = bus->priv;
struct stmmac_priv *priv;
struct dw_xpcs *xpcs;
int mode, addr;
@@ -507,7 +506,7 @@ int stmmac_xpcs_setup(struct mii_bus *bus)
/* Try to probe the XPCS by scanning all addresses. */
for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
- xpcs = xpcs_create_byaddr(bus, addr, mode);
+ xpcs = xpcs_create_byaddr(priv->mii, addr, mode);
if (IS_ERR(xpcs))
continue;
--
2.42.1
