On Sun, Dec 03, 2023 at 11:24:31AM +0000, Conor Dooley wrote: > On Fri, Dec 01, 2023 at 11:16:50PM -0500, Abdel Alkuor wrote: > > as6200 is high accuracy temperature sensor of -/+ 0.4C degree > Hi Conor, > Is +/- 0.4 degrees really "high accuracy"? > That's what the datasheet says :D. I'll remove it. > > with a range between -40C to 125C degrees > > > > Signed-off-by: Abdel Alkuor <alkuor@xxxxxxxxx> > > --- > > Changes in v2: > > - Add vdd-supply > > > > .../bindings/iio/temperature/ams,as6200.yaml | 49 +++++++++++++++++++ > > 1 file changed, 49 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/iio/temperature/ams,as6200.yaml > > > > diff --git a/Documentation/devicetree/bindings/iio/temperature/ams,as6200.yaml b/Documentation/devicetree/bindings/iio/temperature/ams,as6200.yaml > > new file mode 100644 > > index 000000000000..a1817795cdca > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iio/temperature/ams,as6200.yaml > > @@ -0,0 +1,49 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/iio/temperature/ams,as6200.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: AMS AS6200 Temperature Sensor > > + > > +maintainers: > > + - Abdel Alkuor <alkuor@xxxxxxxxx> > > + > > +description: | > > Please add the text from your commit message (although perhaps dropping > the "high accuracy" section) here. > > Otherwise, this looks okay to me. Sounds good. Will add it in v3. > > Thanks, > Conor. > Thanks, Abdel > > + https://ams.com/documents/20143/36005/AS6200_DS000449_4-00.pdf > > + > > +properties: > > + compatible: > > + const: ams,as6200 > > + > > + reg: > > + maxItems: 1 > > + > > + vdd-supply: true > > + > > + interrupts: > > + maxItems: 1 > > + > > +required: > > + - compatible > > + - reg > > + - vdd-supply > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/interrupt-controller/irq.h> > > + i2c { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + temperature-sensor@48 { > > + compatible = "ams,as6200"; > > + reg = <0x48>; > > + vdd-supply = <&vdd>; > > + interrupt-parent = <&gpio1>; > > + interrupts = <17 IRQ_TYPE_EDGE_BOTH>; > > + }; > > + }; > > +... > > -- > > 2.34.1 > >