Hi Rob Herring,
Thanks for the feedback.
> -----Original Message-----
> From: Rob Herring <robh@xxxxxxxxxx>
> Sent: Monday, December 4, 2023 3:13 PM
> Subject: Re: [PATCH v2 04/11] dt-bindings: thermal: Convert da906{1,2}
> thermal to json-schema
>
> On Sat, Dec 02, 2023 at 07:25:28PM +0000, Biju Das wrote:
> > Convert the da906{1,2} thermal device tree binding documentation to
> > json-schema.
> >
> > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > ---
> > .../bindings/thermal/da9062-thermal.txt | 36 ------------
> > .../bindings/thermal/dlg,da9062-thermal.yaml | 58
> > +++++++++++++++++++
> > 2 files changed, 58 insertions(+), 36 deletions(-) delete mode
> > 100644 Documentation/devicetree/bindings/thermal/da9062-thermal.txt
> > create mode 100644
> > Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/thermal/da9062-thermal.txt
> > b/Documentation/devicetree/bindings/thermal/da9062-thermal.txt
> > deleted file mode 100644
> > index e241bb5a5584..000000000000
> > --- a/Documentation/devicetree/bindings/thermal/da9062-thermal.txt
> > +++ /dev/null
> > @@ -1,36 +0,0 @@
> > -* Dialog DA9062/61 TJUNC Thermal Module
> > -
> > -This module is part of the DA9061/DA9062. For more details about
> > entire
> > -DA9062 and DA9061 chips see
> > Documentation/devicetree/bindings/mfd/da9062.txt
> > -
> > -Junction temperature thermal module uses an interrupt signal to
> > identify -high THERMAL_TRIP_HOT temperatures for the PMIC device.
> > -
> > -Required properties:
> > -
> > -- compatible: should be one of the following valid compatible string
> lines:
> > - "dlg,da9061-thermal", "dlg,da9062-thermal"
> > - "dlg,da9062-thermal"
> > -
> > -Optional properties:
> > -
> > -- polling-delay-passive : Specify the polling period, measured in
> > - milliseconds, between thermal zone device update checks.
> > -
> > -Example: DA9062
> > -
> > - pmic0: da9062@58 {
> > - thermal {
> > - compatible = "dlg,da9062-thermal";
> > - polling-delay-passive = <3000>;
> > - };
> > - };
> > -
> > -Example: DA9061 using a fall-back compatible for the DA9062 onkey
> > driver
> > -
> > - pmic0: da9061@58 {
> > - thermal {
> > - compatible = "dlg,da9061-thermal", "dlg,da9062-thermal";
> > - polling-delay-passive = <3000>;
> > - };
> > - };
> > diff --git
> > a/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml
> > b/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml
> > new file mode 100644
> > index 000000000000..0021ebdd83a0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yam
> > +++ l
> > @@ -0,0 +1,58 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +
> > +title: Dialog DA9062/61 TJUNC Thermal Module
> > +
> > +description:
> > + This module is part of the DA9061/DA9062. For more details about
> > +entire
> > + DA9062 and DA9061 chips see
> > +Documentation/devicetree/bindings/mfd/da9062.txt
> > +
> > + Junction temperature thermal module uses an interrupt signal to
> > + identify high THERMAL_TRIP_HOT temperatures for the PMIC device.
> > +
> > +maintainers:
> > + - Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > +
> > +properties:
> > + compatible:
> > + oneOf:
> > + - items:
> > + - enum:
> > + - dlg,da9062-thermal
> > + - items:
> > + - enum:
> > + - dlg,da9061-thermal
> > + - const: dlg,da9062-thermal # da9062-thermal fallback
> > +
> > + polling-delay-passive:
> > + description:
> > + Specify the polling period, measured in milliseconds, between
> > + thermal zone device update checks.
> > +
> > +required:
> > + - compatible
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > + i2c {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + pmic@58 {
> > + compatible = "dlg,da9062";
> > + reg = <0x58>;
> > + interrupt-parent = <&gpio6>;
> > + interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
> > + interrupt-controller;
> > +
> > + thermal {
> > + compatible = "dlg,da9062-thermal";
> > + polling-delay-passive = <3000>;
> > + };
> > + };
> > + };
>
> Just drop the example here. No need for 2 examples, just provide 1
> complete example in the MFD schema.
>
> With that,
OK, will drop example in the next version.
Cheers,
Biju
>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
>
> Rob
